254
edits
CNC router, benchtop (SIENCI LongMill) ID:143: Difference between revisions
Jump to navigation
Jump to search
CNC router, benchtop (SIENCI LongMill) ID:143 (view source)
Revision as of 04:35, 6 October 2024
, 6 October→Update: (10/21/2022): Added link to Longboard Documentation on Scenci's site.
Pat.spencer (talk | contribs) (→Update: (10/21/2022): Added link to Longboard Documentation on Scenci's site.) |
|||
| Line 20: | Line 20: | ||
The controller is an Arduino running GRBL. <br />There is a ton of valuable reference material on their "Resources" website. See -> https://resources.sienci.com/view/lm-welcome/ | The controller is an Arduino running GRBL. <br />There is a ton of valuable reference material on their "Resources" website. See -> https://resources.sienci.com/view/lm-welcome/ | ||
For technical Details see https://resources.sienci.com/view/lm-longboard-documentation/ | |||
'''Bed size''': 250mm x 340mm (10"x 13"). The Z travel is 105mm. The clearance below the gantry is also about 105mm so this is the thickest material that could be mounted, although the router can be adjusted higher if the material has the right shape to clear the gantry. There is about a 60mm offset from the gantry to the router bit (in the Y axis) that could be used for taller pieces. | '''Bed size''': 250mm x 340mm (10"x 13"). The Z travel is 105mm. The clearance below the gantry is also about 105mm so this is the thickest material that could be mounted, although the router can be adjusted higher if the material has the right shape to clear the gantry. There is about a 60mm offset from the gantry to the router bit (in the Y axis) that could be used for taller pieces. | ||