Pinball machine (Williams Road Kings) ID:129: Difference between revisions

Pinball machine (Williams Road Kings) ID:129 (view source)

24 bytes added , 1 January 2016

formatting overhaul

844

edits

@@ Line 1: / Line 1: @@
 Pinball machine repair/refurbish
-To do:
+== To do ==
-Functional:
+=== Functional ===
--Diagnose fuse blowing problem:
+* Diagnose fuse blowing problem. Likely culprit: bad solenoid on jet bumper (already disassembled - discoloured)
-Likely culprit - bad solenoid on jet bumper (already disassembled - discoloured)
+* Replace all rubber bumpers
+* Realign flippers
+* Descale copper contacts. Better current flow = better power from flippers
+* [Optional] Replace lights with LED equivalents/rewire motherboard to work with LEDs.
+* Resolder top front speaker wires. Only internal speaker works; top disconnected
+* Find replacement coin rejector. Player 2 quarter slot rejector missing
--Replace all rubber bumpers
+=== Formal ===
+* Redo exterior paint job, replace decals on side (repaint? vinyl decal?)
--Realign flippers
+** image original artwork
+** sand down to wood
--Descale copper contacts/better current flow = better power from flippers
+** prime and seal
+** reapply artwork
--Optional; replace lights with led equivalent/re wire motherboard to work with leds.
--Resolder top front speaker wires, only internal speaker works - top disconnected
--Find replacement coin rejector - player 2 quarter slot rejector missing
-Formal:
--redo exterior paint job, replace decals on side (repaint? vinyl decal?)
---image original artwork
---sand down to wood
---prime and seal
---reapply artwork
 [[Category:OngoingProjects]]