Drill press (Mastercraft) ID:42
(Redirected from Drill Press (Mastercraft))
Jump to navigation
Jump to search
 | |
| Type | Drill Press |
| Make/Model | Mastercraft 10" Drill Press with Laser |
| Serial number | ?? |
| Original owner | Algenon |
| Loan status | Donated to Protospace |
| Arrival date | Pre 2013 |
| Location | Metalworking Shop |
| Functional status | Working |
| Usage permissions | Open to Members & Friends |
| Certification | Self-Taught |
| Wiki-ID | 42 |
| Label | 1.0" 1.5" 2.0" |
Usage Notes
- Adjust bit with chuck key, then return chuck key to its holder
- Twist chuck by hand to ensure bit is centered, not stuck between two jaws
- Adjust table height/position by loosening rear left bolt, then turning right crank or pushing table sideways
- Ensure table hole is lined up with bit. If not, bit will drill through table and ruin it.
- Tighten rear-left bolt to secure table
- Ensure workpiece is secured
- Use depth-limiter knob to control max depth
Specs
- 10" range, 2 1/4" stroke
- 5 speeds (max 3020 RPM)
- 3.2A motor
- Battery laserline
- Worklight
- Rack & Pinion crank table adjust
- 45° tilt
- Drills holes in materials with more power and accuracy than a hand drill