Air compressor, 80-gallon (Ingersoll Rand T30): Difference between revisions
Jump to navigation
Jump to search
(Created page with "{{Template:EquipmentPage |toolname= Two-stage reciprocating compressor |model=Ingersoll-Rand T30 242ON5 |serial=30T 758634 |owner=Kyle Paavola |loanstatus= Long Term Loan |arr...") |
No edit summary |
||
| Line 15: | Line 15: | ||
This compressor is an industrial grade machine to be treated with some degree of respect. This 5HP compressor is electrically driven by 208V single phase available through the same pigtail that powers the TIG welder. | This compressor is an industrial grade machine to be treated with some degree of respect. This 5HP compressor is electrically driven by 208V single phase available through the same pigtail that powers the TIG welder. | ||
==Use and Maintenance== | ==Use and Maintenance== | ||
verbatim from the sticker right on the compressor but just in case you have not read it: | |||
CAUTION: TURN OFF POWER BEFORE SERVICING | |||
Daily: | |||
*Drain any condensate from ceceiver and traps | |||
*Check for any unusual noise or vibration | |||
Weekly | |||
*Check for proper oil level | |||
Monthly | |||
*Clean air filter | |||
*Clean all external parts of compressor and driver | |||
*Test relief valve manually for proper operation | |||
*Inspect entire air system for leaks | |||
*Inspect oil for contamination and change if necessary | |||
*Check belt tension and wear | |||
Every 3 months: | |||
*Change oil using an approved lubricant | |||
*Inspect valve assemblies | |||
for more information, check the operator's manual at: | |||
http://manualarchive.ingersollrandproducts.com/ir_pdfs/Compressed%20Air/Air%20Compressors/Reciprocating%20Compressor/22607402.PDF | |||
==Approved Lubricant== | ==Approved Lubricant== | ||
ONLY Ingersoll-Rand All season oil is currently approved for use in this compressor. You must check for the presence of oil in the compressor pan before operating this machine. | ONLY Ingersoll-Rand All season oil is currently approved for use in this compressor. You must check for the presence of oil in the compressor pan before operating this machine. | ||
Revision as of 04:02, 4 October 2014
| [[File:{{{id}}}.jpg|250px]] | |
| Type | Two-stage reciprocating compressor |
| Make/Model | Ingersoll-Rand T30 242ON5 |
| Serial number | 30T 758634 |
| Original owner | Kyle Paavola |
| Loan status | Long Term Loan |
| Arrival date | |
| Location | Right of the welding bench |
| Functional status | Working |
| Usage permissions | Members and friends only |
| Certification | To be determined. Do not start if you don't feel qualified |
| Wiki-ID | [[{{{id}}}]] |
| Label | 1.0" 1.5" 2.0" |
Specs
This compressor is an industrial grade machine to be treated with some degree of respect. This 5HP compressor is electrically driven by 208V single phase available through the same pigtail that powers the TIG welder.
Use and Maintenance
verbatim from the sticker right on the compressor but just in case you have not read it: CAUTION: TURN OFF POWER BEFORE SERVICING Daily:
- Drain any condensate from ceceiver and traps
- Check for any unusual noise or vibration
Weekly
- Check for proper oil level
Monthly
- Clean air filter
- Clean all external parts of compressor and driver
- Test relief valve manually for proper operation
- Inspect entire air system for leaks
- Inspect oil for contamination and change if necessary
- Check belt tension and wear
Every 3 months:
- Change oil using an approved lubricant
- Inspect valve assemblies
for more information, check the operator's manual at: http://manualarchive.ingersollrandproducts.com/ir_pdfs/Compressed%20Air/Air%20Compressors/Reciprocating%20Compressor/22607402.PDF
Approved Lubricant
ONLY Ingersoll-Rand All season oil is currently approved for use in this compressor. You must check for the presence of oil in the compressor pan before operating this machine.