Power supply, bench, 500 V (Heathkit PS-3) ID:27: Difference between revisions
m (Added id) |
m (Updated image link) |
||
(One intermediate revision by the same user not shown) | |||
Line 13: | Line 13: | ||
| certification = You should know high voltage safety | | certification = You should know high voltage safety | ||
| id=27 | | id=27 | ||
| itemphoto = [[File: | | itemphoto = [[File:27.jpg|350px|thumb|right|The front of #16]] | ||
}} | }} | ||
Latest revision as of 00:26, 25 November 2016
This power supply produces potentially dangerous voltages. Know high voltage safety before operating. Also, #18's metal case is currently ungrounded. |
Type | Heathkit vacuum tube power supply |
Make/Model | Heathkit PS-3 |
Serial number | #16 and #18 (previous owner's inventory numbers) |
Original owner | Protospace (#16), Jack S (#18) |
Loan status | Donation |
Arrival date | Several years before 2016 (#16), 2016-05-31 (#18) |
Location | Electronics room |
Functional status | Broken (#16), Working (#18) |
Usage permissions | Open to full members |
Certification | You should know high voltage safety |
Wiki-ID | 27 |
Label | 1.0" 1.5" 2.0" |
History
In May 2016, Ian O decided to get #16 working. He had heard from Matt F that Clint B had plugged it in and it produced no voltage. Ian disassembled it and tested the capacitors and resistors, finding them all within spec. He also started converting to use a modern grounded power cord (IEC 60320 C14 inlet/C13 cord) using a power inlet module taken from an unusable piece of equipment on the free shelf. He got most of the way through this conversion before Jack S brought in #18, which was already working, on May 31. The plan became to use #18 and keep #16 for parts. On the same day, he brought in his tube tester (B&K 700) to help Ian diagnose #16. All of the tubes it had tests for (i.e. not the 0A2s or the 1619s) tested good. Later, during Meet & Geek, Robb L's tube tester was used to test the same tubes with similar results.