Pinball machine (Williams Road Kings) ID:129: Difference between revisions
Jump to navigation
Jump to search
m (Cjs moved page Pinball machine (Williams Road Kings) to Pinball machine (Williams Road Kings) ID:129: Update name to follow naming conventions) |
Nick.boers (talk | contribs) (Added a troubleshooting hint) |
||
| Line 18: | Line 18: | ||
__NOTOC__ | __NOTOC__ | ||
== Documents == | ==Documents== | ||
Manual is available as a PDF online and on paper inside the machine. | Manual is available as a PDF online and on paper inside the machine. | ||
== | ==Troubleshooting== | ||
* If pressing start button results in soft sound repeated three times "dugga dugga dugga" the machine can not find both balls. One may be stuck/hiding in the playing area or the limit switches that detect the balls near the launcher may be dirty or damaged. | |||
* | |||
=== | * Please add more problems and solutions as time goes on! | ||
* | |||
** Repaint? | ==To do== | ||
** Vinyl decal? | |||
** | ===Functional=== | ||
** | |||
** | * Diagnose fuse blowing problem | ||
** | **Likely culprit: bad solenoid on jet bumper (already disassembled - discoloured) | ||
** | * Replace left flipper solenoid | ||
**This is the cause of the left flipper sticking on the down-stroke, and the repeated blowing of at least one fuse. | |||
** Order new solenoid | |||
* Replace all rubber bumpers | |||
** Order new bumpers | |||
* Realign flippers | |||
**They keep getting out of alignment no matter how much they are tightened. Maybe threadlocker would help? | |||
* Descale copper contacts | |||
**Better current flow = better power from flippers | |||
**Ian did one in Feb 2016. | |||
**Consider replacing with a different type of switches | |||
* [Optional] Replace lights with LED equivalents/rewire motherboard to work with LEDs | |||
**Rutger wants to do this pretty much immediately (as of Feb 2016). | |||
**Frollard is not so optimistic, because the existing matrix depends on the incandescent bulbs' resistance, making LED replacement complicated and likely not at all power-saving. | |||
* Resolder top front speaker wires | |||
**Only internal speaker works; top disconnected | |||
* Find replacement coin rejector | |||
**Player 2 quarter slot rejector missing | |||
===Formal=== | |||
* Redo exterior paint job; replace decals on side | |||
**Repaint? | |||
**Vinyl decal? | |||
** Image original artwork | |||
** Vectorize artwork | |||
** Sand down to wood | |||
** Prime and seal | |||
** Reapply artwork | |||
[[Category:Ongoing projects]] | [[Category:Ongoing projects]] | ||
Revision as of 02:51, 4 January 2023
 The pinball machine, showing its location to the left of the large laser cutter. The laser cutter's honeycombs and a laser-cut skull are visible in the background. | |
| Type | Pinball machine |
| Make/Model | Williams Road Kings |
| Serial number | ?? |
| Original owner | Frollard |
| Loan status | Long-term loan |
| Arrival date | 2012 or earlier |
| Location | Next to the large laser cutter |
| Functional status | Working with a few things broken as of 2019-01-27 |
| Usage permissions | Open to All |
| Certification | Self-taught |
| Wiki-ID | 129 |
| Label | 1.0" 1.5" 2.0" |
Documents
Manual is available as a PDF online and on paper inside the machine.
Troubleshooting
- If pressing start button results in soft sound repeated three times "dugga dugga dugga" the machine can not find both balls. One may be stuck/hiding in the playing area or the limit switches that detect the balls near the launcher may be dirty or damaged.
- Please add more problems and solutions as time goes on!
To do
Functional
- Diagnose fuse blowing problem
- Likely culprit: bad solenoid on jet bumper (already disassembled - discoloured)
- Replace left flipper solenoid
- This is the cause of the left flipper sticking on the down-stroke, and the repeated blowing of at least one fuse.
- Order new solenoid
- Replace all rubber bumpers
- Order new bumpers
- Realign flippers
- They keep getting out of alignment no matter how much they are tightened. Maybe threadlocker would help?
- Descale copper contacts
- Better current flow = better power from flippers
- Ian did one in Feb 2016.
- Consider replacing with a different type of switches
- [Optional] Replace lights with LED equivalents/rewire motherboard to work with LEDs
- Rutger wants to do this pretty much immediately (as of Feb 2016).
- Frollard is not so optimistic, because the existing matrix depends on the incandescent bulbs' resistance, making LED replacement complicated and likely not at all power-saving.
- Resolder top front speaker wires
- Only internal speaker works; top disconnected
- Find replacement coin rejector
- Player 2 quarter slot rejector missing
Formal
- Redo exterior paint job; replace decals on side
- Repaint?
- Vinyl decal?
- Image original artwork
- Vectorize artwork
- Sand down to wood
- Prime and seal
- Reapply artwork