Pinball machine (Williams Road Kings) ID:129: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
Ian Oliver (talk | contribs) (formatting overhaul) |
||
| Line 1: | Line 1: | ||
Pinball machine repair/refurbish | Pinball machine repair/refurbish | ||
To do | == To do == | ||
Functional | === Functional === | ||
* Diagnose fuse blowing problem. Likely culprit: bad solenoid on jet bumper (already disassembled - discoloured) | |||
Likely culprit | * Replace all rubber bumpers | ||
* Realign flippers | |||
* Descale copper contacts. Better current flow = better power from flippers | |||
* [Optional] Replace lights with LED equivalents/rewire motherboard to work with LEDs. | |||
* Resolder top front speaker wires. Only internal speaker works; top disconnected | |||
* Find replacement coin rejector. Player 2 quarter slot rejector missing | |||
=== Formal === | |||
* Redo exterior paint job, replace decals on side (repaint? vinyl decal?) | |||
** image original artwork | |||
** sand down to wood | |||
** prime and seal | |||
** reapply artwork | |||
Formal | |||
[[Category:OngoingProjects]] | [[Category:OngoingProjects]] | ||
Revision as of 23:20, 1 January 2016
Pinball machine repair/refurbish
To do
Functional
- Diagnose fuse blowing problem. Likely culprit: bad solenoid on jet bumper (already disassembled - discoloured)
- Replace all rubber bumpers
- Realign flippers
- Descale copper contacts. Better current flow = better power from flippers
- [Optional] Replace lights with LED equivalents/rewire motherboard to work with LEDs.
- Resolder top front speaker wires. Only internal speaker works; top disconnected
- Find replacement coin rejector. Player 2 quarter slot rejector missing
Formal
- Redo exterior paint job, replace decals on side (repaint? vinyl decal?)
- image original artwork
- sand down to wood
- prime and seal
- reapply artwork