Metal Shear Brake Roll - (New Magnum 52) ID:180

From Protospace Wiki
Revision as of 01:43, 3 April 2024 by Jamie.frost (talk | contribs) (New tool first add)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

← Back to tools we have

[[File:|250px]]
Type Metal 3-in-1 Shear, Brake, Roller
Make/Model Magnum 52"
Serial number ?
Original owner Protospace
Loan status Owned
Arrival date 2024
Location Metal shop
Functional status First installation/calibration in progress Apr 2024
Usage permissions Members
Certification NMO
Wiki-ID [[]]
Label 1.0" 1.5" 2.0"


Specs

Advertised specs:

  • 52" wide
  • 16 Gauge Aluminum
  • 18 Gauge Mild Steel
  • 9 removable fingers from 1" - 15"
  • 3" slip rolls with forming grooves

Usage

ABSOLUTELY, POSITIVELY, VERY VERY NO WIRE CUTTING/BENDING WITH THE BRAKE/SHEAR. Lots of pinch points - Caution, this will cut, crush, and eat any body parts you put in the moving bits. Do not put anything squishy near anything hard or all your blood will fall out, and we'll have to call your emergency contact.

Read manual linked below to understand adjustments. The roller gears require adjustment to mesh properly or they will be damaged.

History

Replaces the identical model brought in and eventually returned to John. Thanks John! Pitch https://forum.protospace.ca/t/pitch-a-replacement-for-the-metal-shear-that-has-returned-home/4365/2 Discussion: https://forum.protospace.ca/t/3-in-1-brake-shear-roller/6179


Troubleshooting

Turn it off and then on again.

Documentation

File:Metal_Shear_Brake_Roll_-_Magnum_copy.pdf