Laser cutter, large (Rabbit Laser RL-80-1290) ID:6

From Protospace Wiki
Revision as of 05:09, 13 September 2019 by Cjs (talk | contribs) (updated links, minor reformatting)
Jump to navigation Jump to search

← Back to tools we have

6.jpg
Type Laser Cutter
Make/Model Rabbit Laser USA RL-80-1290 (where RL is the factory code, 80 is the original laser power in watts, and 1290 represents the bed size (1200 x 900 mm))
Serial number ??
Original owner Brian Queen
Loan status Semi-Permanent Loan
Arrival date 2012-02
Location Bay 108, near the door to the front rooms
Functional status Working
Usage permissions Members & Friends Only
Certification Must complete Laser Certification
Wiki-ID 6
Label 1.0" 1.5" 2.0"


Arguably the most popular tool at Protospace, the laser cutter uses a CO2 laser to cut and engrave a variety of non-metal materials (though some metals can be engraved).

Software

We currently have LaserCut 6.0 installed on the computer connected to the Laser Cutter. Unfortunately LaserCut 6.0 requires a USB dongle to be hooked up to the PC at all times as a form of DRM. If you're running a personal copy you are restricted to a demo version (no saving - though there is a work around). Later versions (6.1+) have dropped the USB dongle requirement but can't communicate with our laser cutter directly.

Downloads

LaserCut 5.3 (Google Drive, Direct from Leetro) for Windows Paid, Demo

The full version, but requires a special SenseLock USB Dongle to be connected to the PC running it or the software is limited to a demo mode (which is still useful for familiarizing yourself with the program). :This version is needed in order to communicate with our laser cutter, as 6.1 doesn't support ours.


LaserCut 6.1 (Google Drive, Direct from Leetro) for Windows Free

Not directly compatible with our laser cutter but has no USB dongle requirement, is fully functional aside from not being able to communicate with our laser cutter. Can still be used to prepare files for the earlier version of LaserCut (5.3). Both versions of LaserCut can be installed at the same time making this version a great option too.


123D Make (Direct from Autodesk) for Windows, Mac, iPad/iPhone Free

A program for converting 3D models into pieces which can be laser cut and attached together to form a fully 3D model out of laser cut materials (example).


Pepakura Designer (Direct from Tama Software) for Windows Paid, Demo

A program for converting 3D models into origami style pages which can be printed, cut out by hand and/or laser cut, then folded to form a 3D object (examples).

Resources

The Powerpoint presentation that is shown as part of the laser certification process (December 8, 2015), useful as a refresher once you've completed your certification.

TemplateMaker, a very useful Online tool for generating various custom boxes and shapes that can be cut on the laser.

Wolfie's SVG Puzzle Generator, exports a randomly generated puzzle in SVG format which can be converted to DXF and then laser cut out of something (in order to make personalized puzzles).

MakerCase, generates a proper box with the option to set the thickness of the material and pick which style of joints to use.


It is imperative that you do a chlorine test on unapproved materials before working on them with the laser cutter.


Specs

  • 80-watt DC-excited laser
    • Water-cooled, with chiller accessible from the front
  • Bed size: 1200 mm × 900 mm (47.2" × 35.4")
    • Front panel of machine can be removed or folded down to insert pieces longer than 3'
  • Controller: Leetro MPC 6525A
  • Can cut or etch up to 1/2" thick light materials such as woods and some plastics
Do not cut any chlorinated synthetics (some types of plastics and rubbers)! The HCl vapors will damage the machine.

Usage Notes

  • Complete Laser Certification to learn how to use the laser. Training is offered about once a month.
  • Perform a simple chlorine test on unapproved materials, as cutting or etching chlorinated materials damages the optics
  • See Power Levels page for notes and details on cutting and etching various materials
  • Power modulation is in a restricted range in the software due to a firmware bug (approximately 8%-30% represents 0%-100% power)
  • Controller occasionally locks up after large cut jobs. E-stop immediately if job timer does not increment in first 5 seconds of job. Post to list for recovery instructions
  • Consult our Laser Standard Operating Procedure

History

  • Originally on loan for 6 months (ending August 2012) in exchange for Protospace performing repairs.
    • Loan has been extended.

Repairs Needed

  • Upgrades discussed
    • Adding air cooling to optics and laser head block
    • Convincing power supply to modulate power levels properly
    • Seal display on controller to prevent smoke from clouding over time.
    • Replace and upgrade chiller (current chiller struggles to keep up with heat generated, and has no safeties on it to signal failure)
    • Relocate chiller to an open-air position (wall mounted)

Repair History

Break-Fix log:

  • 2016-11-06: Chiller failure. Laser tube destroyed (overheated and glass cracked)
    • 2016-11-07: Laser tube replaced with an aging, but unused tube that was donated from a scrap laser
  • 2016-11-11: Chiller failure. Laser tube destroyed.
    • 2016-11-13: Two new laser tubes ordered from an American source.
    • 2016-11-24: Laser tube replaced, chiller pump is broken.
    • 2016-12-04: Chiller repaired. Alignment and power testing is pending.
    • 2016-12-18: Laser is fully operational.
  • 2019-08-17: Lens failure. [1]
    • 2019-08-17: New lens ordered.
    • 2019-08-21: Lens replaced, laser is working.

Regular maintenance log: