Laser cutter, large (Rabbit Laser RL-80-1290) ID:6: Difference between revisions

From Protospace Wiki
Jump to navigation Jump to search
No edit summary
(45 intermediate revisions by 5 users not shown)
Line 1: Line 1:
{{Equipment page
| toolname = Laser Cutter
| model = [http://www.rabbitlaserusa.com/laser_RL1290.html Rabbit Laser USA RL-80-1290] (where RL is the factory code, 80 is the original laser power in watts, and 1290 represents the bed size (1200 x 900 mm))
| serial = ??
| owner = Brian Queen
| loanstatus = Semi-Permanent Loan
| arrived = 2012-02
| location = Bay 108, near the door to the front rooms
| status = Working
| permission = Members & Friends Only
| certification = Must complete [[Laser Certification]]
| id = 6
| caption = The large laser cutter, with its lid open and a piece of material on the bed
}}
{{#evt:
{{#evt:
service=youtube
service=youtube
|id=https://www.youtube.com/watch?v=29YLiiapFHc
|id=https://www.youtube.com/watch?v=29YLiiapFHc
|alignment=right
|alignment=right
|dimensions=480
}}
}}


{{Template:EquipmentPage
Arguably the most popular tool at Protospace, the '''laser cutter''' uses a CO<sub>2</sub> laser to cut and engrave a variety of non-metal materials (though some metals can be engraved).
|toolname=Laser Cutter
|model=[http://www.rabbitlaserusa.com/laser_RL1290.html RL1290]
|serial=??
|owner=Brian Queen
|loanstatus=Semi-Permanent Loan
|arrived=Before 2013
|location=Main Bay


|status=Functional
=== Software ===
|permission=Members & Friends Only
We currently have '''LaserCut 6.0''' installed on the computer connected to the Laser Cutter. Unfortunately LaserCut 6.0 requires a USB dongle to be hooked up to the PC at all times as a form of [[wikipedia:Digital rights management|DRM]]. If you're running a personal copy you are restricted to a demo version (no saving - though there is a work around). Later versions (6.1+) have dropped the USB dongle requirement but can't communicate with our laser cutter directly.
|certification=Must complete [[Laser Certification]]
|itemphoto=[[File:Laser cutter, open.jpg|350px|thumb|right|]]
}}


[[Category:Showcase tools]]
==== Downloads ====
[[Category:Plasticworking tools]]
[[Category:Woodworking tools]]
[[Category:Textileworking tools]]
[[Category:Computer-controlled tools]]


''LaserCut 5.3'' ([https://docs.google.com/uc?export=download&id=0B7yyT7cWvyTVS0FZRnlvenJtRHc Google Drive], [http://www.leetro.com/english/down/productcatalog2015/SoftwareDriver/MPC6565/LaserCut5.3(V4408)-Installer.rar Direct from Leetro]) for <i class="fa fa-windows"></i> Windows <sup>Paid, Demo</sup><br />
:The full version, but requires a special SenseLock USB Dongle to be connected to the PC running it or the software is limited to a demo mode (which is still useful for familiarizing yourself with the program). This version is needed in order to communicate with our laser cutter, as 6.1 doesn't support ours.


__TOC__


''LaserCut 6.1'' ([https://docs.google.com/uc?export=download&id=0B7yyT7cWvyTVMVR4RklNLVkyaFk Google Drive], [http://www.leetro.com/english/down/productcatalog2015/SoftwareDriver/MPC6585/LaserCut61%20(MPC6585)%20Installer.rar Direct from Leetro]) for <i class="fa fa-windows"></i> Windows <sup>Free</sup><br />
:Not directly compatible with our laser cutter but has no USB dongle requirement, is fully functional aside from not being able to communicate with our laser cutter. Can still be used to prepare files for the earlier version of LaserCut ([[#Downloads|5.3]]). Both versions of LaserCut can be installed at the same time making this version a great option too.


Arguably the most popular tool at Protospace, the '''Laser Cutter''' uses a CO<sub>2</sub> laser to cut & engrave a variety of non-metal materials (though some metals can be engraved).


=== Software ===
''123D Make'' ([http://www.123dapp.com/make Direct from Autodesk]) for <i class="fa fa-windows"></i> Windows, <i class="fa fa-apple"></i> Mac, <i class="fa fa-apple"></i> iPad/iPhone <sup>Free</sup><br />
We currently have '''LaserCut 5.3''' installed on the computer connected to the Laser Cutter. Unfortunately LaserCut 5.3 requires a USB dongle to be hooked up to the PC at all times as a form of [https://en.wikipedia.org/wiki/Digital_rights_management DRM]. If you're running a personal copy you are restricted to a demo version (no saving - though there is a work around). Later versions (6.1+) have dropped the USB dongle requirement but can't communicate with our laser cutter directly.
:A program for converting 3D models into pieces which can be laser cut and attached together to form a fully 3D model out of laser cut materials ([http://imgur.com/AnC8UJA example]).


==== Downloads ====


''LaserCut 5.3'' ([https://docs.google.com/uc?export=download&id=0B7yyT7cWvyTVS0FZRnlvenJtRHc Google Drive], [http://www.leetro.com/english/down/productcatalog2015/SoftwareDriver/MPC6565/LaserCut5.3(V4408)-Installer.rar Direct from Leetro]) for <i class="fa fa-windows"></i> Windows.<br />
''Pepakura Designer'' ([http://www.tamasoft.co.jp/pepakura-en/ Direct from Tama Software]) for <i class="fa fa-windows"></i> Windows <sup>Paid, Demo</sup><br />
The full version, but requires a special SenseLock USB Dongle to be connected to the PC running it or the software is limited to a demo mode (which is still useful for familiarizing yourself with the program). This version is needed in order to communicate with our laser cutter, as 6.1 doesn't support ours.
:A program for converting 3D models into origami style pages which can be printed, cut out by hand and/or laser cut, then folded to form a 3D object ([http://www.tamasoft.co.jp/pepakura-en/gallery/list.php examples]).


=== Resources ===


''LaserCut 6.1'' ([https://docs.google.com/uc?export=download&id=0B7yyT7cWvyTVMVR4RklNLVkyaFk Google Drive], [http://www.leetro.com/english/down/productcatalog2015/SoftwareDriver/MPC6585/LaserCut61%20(MPC6585)%20Installer.rar Direct from Leetro]) for <i class="fa fa-windows"></i> Windows. ''Not directly compatible with our laser cutter''<br />
The [https://drive.google.com/file/d/0B5TY9LLHsJj3R0pad1duc1JGcXM/view?usp=sharing Powerpoint presentation] that is shown as part of the laser certification process, useful as a refresher once you've completed your [[Laser_Certification|certification]].
The full version with no restrictions. Can be used to prepare files for the earlier version of LaserCut ([[#Downloads|5.3]]). Both versions of LaserCut can be installed at the same time.


=== Resources ===
[http://templatemaker.nl/ TemplateMaker], a very useful Online tool for generating various custom boxes and shapes that can be cut on the laser.


The [https://drive.google.com/file/d/0B8eerfv68EE4eWNVRWRZX0FzY0k/view Powerpoint Presentation] that is shown as part of the laser certification process (December 8, 2015), useful as a refresher once you've completed your [[Laser_Certification|certification]].
[http://www.wolfiesden.com/Laser/PuzzleCreator.asp Wolfie's SVG Puzzle Generator], exports a randomly generated puzzle in SVG format which can be converted to DXF and then laser cut out of something (in order to make personalized puzzles).


[http://templatemaker.nl/ TemplateMaker], a very useful Online tool for generating various custom boxes & shapes that can be cut on the laser.
[http://www.makercase.com/ MakerCase], generates a proper box with the option to set the thickness of the material and pick which style of joints to use.




{{Box.Warning|It is imperative that you do a [[Chlorine Test]] on unapproved materials before working on them with the Laser Cutter}}
{{Warning|It is imperative that you do a [[chlorine test]] on unapproved materials before working on them with the laser cutter.}}


==Specs==


==Specs==
* 80-watt DC-excited carbon dioxide laser tube
** Water-cooled, with chiller accessible from the front
* Bed size: 1200 mm × 900 mm (47.2" × 35.4")
** Front panel of machine can be removed or folded down to insert pieces longer than 3' (though this can risk dangerous laser radiation exiting the machine, so be careful)
* Controller:  [http://www.leetro.com/english/sale/1-2.html Leetro MPC 6525A]
* Can cut or etch up to 1/4" (6 mm)-thick light materials such as woods and some plastics in one pass, or thicker materials in multiple passes
* Cut kerf is approximately 0.3 mm (full width); you should measure it with your material if it's important to your project


* 80 watt
{{box.Warning|Do not cut any chlorinated synthetics (some types of plastics and rubbers)! The HCl vapors will damage the machine.}}
* 4x3' CNC bed
* Front shield can be dropped to insert pieces longer than 3'
* Water cooled & Ducted
* Can cut or etch up to 1/2" thick light materials such as woods and some plastics
* Cannot cut any chlorinated synthetics (some types of plastics & rubbers)


==Usage Notes==
==Usage Notes==
* Complete [[Laser Certification]] to learn how to use the laser. Training is offered about once a month.
* Complete [[Laser Certification]] to learn how to use the laser. Training is offered about once a month.
* Perform a simple [[Chlorine Test]] on unapproved materials, as cutting or etching chlorinated materials damages the optics
* Perform a simple [[chlorine test]] on unapproved materials, as cutting or etching chlorinated materials damages the optics
* See [[Power Levels]] page for notes and details on cutting and etching various materials
* Power modulation is in a restricted range in the software due to a firmware bug (Approximately 8%-30% represents 0%-100% power)
* Controller occasionally locks up after large cut jobs. E-stop immediately if job timer does not increment in first 5 seconds of job. Post to list for recovery instructions
* Consult our [[Laser Standard Operating Procedure]]
* Consult our [[Laser Standard Operating Procedure]]


==History==  
==History==  


* Originally on loan for 6 months (ending Aug 2012) in exchange for Protospace performing repairs.  
* Originally on loan for 6 months (ending August 2012) in exchange for Protospace performing repairs.  
** Loan has been extended.
** Loan has been extended.


==Repairs Needed==
==Repairs Needed==


*Upgrades discussed
Shocks replaced on lid
**Adding air cooling to optics and laser head block
 
**Convincing power supply to modulate power levels properly
==Repair History==
**Seal display on controller to prevent smoke from clouding over time.
 
Break-Fix log:
*2016-11-06: Chiller failure. Laser tube destroyed (overheated and glass cracked)
**2016-11-07: Laser tube replaced with an aging, but unused tube that was donated from a scrap laser
*2016-11-11: Chiller failure. Laser tube destroyed.
**2016-11-13: Two new laser tubes ordered from an American source.
**2016-11-24: Laser tube replaced, chiller pump is broken.
**2016-12-04: Chiller repaired. Alignment and power testing is pending.
**2016-12-18: Laser is fully operational.
*2019-08-17: Lens failure. [https://groups.google.com/forum/?hl=en#!topic/protospace-discuss/6d1VIPmlR_4]
**2019-08-17: New lens ordered.
**2019-08-21: Lens replaced, laser is working.
 
Regular maintenance log:
 
[[Category:Showcase tools]]
[[Category:Plasticworking tools]]
[[Category:Woodworking tools]]
[[Category:Textileworking tools]]
[[Category:Computer-controlled tools]]

Revision as of 05:24, 22 November 2020

← Back to tools we have

6.jpg
The large laser cutter, with its lid open and a piece of material on the bed
Type Laser Cutter
Make/Model Rabbit Laser USA RL-80-1290 (where RL is the factory code, 80 is the original laser power in watts, and 1290 represents the bed size (1200 x 900 mm))
Serial number ??
Original owner Brian Queen
Loan status Semi-Permanent Loan
Arrival date 2012-02
Location Bay 108, near the door to the front rooms
Functional status Working
Usage permissions Members & Friends Only
Certification Must complete Laser Certification
Wiki-ID 6
Label 1.0" 1.5" 2.0"


Arguably the most popular tool at Protospace, the laser cutter uses a CO2 laser to cut and engrave a variety of non-metal materials (though some metals can be engraved).

Software

We currently have LaserCut 6.0 installed on the computer connected to the Laser Cutter. Unfortunately LaserCut 6.0 requires a USB dongle to be hooked up to the PC at all times as a form of DRM. If you're running a personal copy you are restricted to a demo version (no saving - though there is a work around). Later versions (6.1+) have dropped the USB dongle requirement but can't communicate with our laser cutter directly.

Downloads

LaserCut 5.3 (Google Drive, Direct from Leetro) for Windows Paid, Demo

The full version, but requires a special SenseLock USB Dongle to be connected to the PC running it or the software is limited to a demo mode (which is still useful for familiarizing yourself with the program). This version is needed in order to communicate with our laser cutter, as 6.1 doesn't support ours.


LaserCut 6.1 (Google Drive, Direct from Leetro) for Windows Free

Not directly compatible with our laser cutter but has no USB dongle requirement, is fully functional aside from not being able to communicate with our laser cutter. Can still be used to prepare files for the earlier version of LaserCut (5.3). Both versions of LaserCut can be installed at the same time making this version a great option too.


123D Make (Direct from Autodesk) for Windows, Mac, iPad/iPhone Free

A program for converting 3D models into pieces which can be laser cut and attached together to form a fully 3D model out of laser cut materials (example).


Pepakura Designer (Direct from Tama Software) for Windows Paid, Demo

A program for converting 3D models into origami style pages which can be printed, cut out by hand and/or laser cut, then folded to form a 3D object (examples).

Resources

The Powerpoint presentation that is shown as part of the laser certification process, useful as a refresher once you've completed your certification.

TemplateMaker, a very useful Online tool for generating various custom boxes and shapes that can be cut on the laser.

Wolfie's SVG Puzzle Generator, exports a randomly generated puzzle in SVG format which can be converted to DXF and then laser cut out of something (in order to make personalized puzzles).

MakerCase, generates a proper box with the option to set the thickness of the material and pick which style of joints to use.


It is imperative that you do a chlorine test on unapproved materials before working on them with the laser cutter.

Specs

  • 80-watt DC-excited carbon dioxide laser tube
    • Water-cooled, with chiller accessible from the front
  • Bed size: 1200 mm × 900 mm (47.2" × 35.4")
    • Front panel of machine can be removed or folded down to insert pieces longer than 3' (though this can risk dangerous laser radiation exiting the machine, so be careful)
  • Controller: Leetro MPC 6525A
  • Can cut or etch up to 1/4" (6 mm)-thick light materials such as woods and some plastics in one pass, or thicker materials in multiple passes
  • Cut kerf is approximately 0.3 mm (full width); you should measure it with your material if it's important to your project
Do not cut any chlorinated synthetics (some types of plastics and rubbers)! The HCl vapors will damage the machine.

Usage Notes

History

  • Originally on loan for 6 months (ending August 2012) in exchange for Protospace performing repairs.
    • Loan has been extended.

Repairs Needed

Shocks replaced on lid

Repair History

Break-Fix log:

  • 2016-11-06: Chiller failure. Laser tube destroyed (overheated and glass cracked)
    • 2016-11-07: Laser tube replaced with an aging, but unused tube that was donated from a scrap laser
  • 2016-11-11: Chiller failure. Laser tube destroyed.
    • 2016-11-13: Two new laser tubes ordered from an American source.
    • 2016-11-24: Laser tube replaced, chiller pump is broken.
    • 2016-12-04: Chiller repaired. Alignment and power testing is pending.
    • 2016-12-18: Laser is fully operational.
  • 2019-08-17: Lens failure. [1]
    • 2019-08-17: New lens ordered.
    • 2019-08-21: Lens replaced, laser is working.

Regular maintenance log: