Laser Vacuum Table: Difference between revisions

From Protospace Wiki
Jump to navigation Jump to search
(categories: ongoing projects → past projects)
 
(3 intermediate revisions by 2 users not shown)
Line 20: Line 20:
*''' 12 Sept, 2013 -''' No progress. Laser's still down.
*''' 12 Sept, 2013 -''' No progress. Laser's still down.
*''' 20 Sept, 2013 -''' No progress. Laser's still down.
*''' 20 Sept, 2013 -''' No progress. Laser's still down.
*''' 27 Sept, 2013 -''' No progress. Laser's still down.
*''' 09 Oct, 2013 -''' No progress. Laser's still down.


[[Category:OngoingProjects]]
 
[[Category:Past projects]]

Latest revision as of 04:04, 31 March 2019

Laser Vac 01.jpg

Info

Member name: Matt F

Member contact: Email, found via list.

Project name & pitch: This is a small vacuum table for the laser, to belong to Protospace, so that you can cut paper/fabric without it blowing away from the laser's air nozzle.

Storage location: Bay ?? or cart

Project start date: 31 Aug, 2013

Final Deadline: 01 Nov, 2013

Updates

  • 02 Sept, 2013 - Vacuum is strapped to frame, box prototype is done. Vacuum is too loud. Considering running directly off of HVAC instead for low pressure air source.
  • 12 Sept, 2013 - No progress. Laser's still down.
  • 20 Sept, 2013 - No progress. Laser's still down.
  • 27 Sept, 2013 - No progress. Laser's still down.
  • 09 Oct, 2013 - No progress. Laser's still down.