The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
← Back to tools we have
|
Type |
Drill Press
|
Make/Model |
Mastercraft 10" Drill Press with Laser
|
Serial number |
??
|
Original owner |
Algenon
|
Loan status |
Donated to Protospace
|
Arrival date |
Pre 2013
|
Location |
Metalworking Shop
|
Functional status |
Working
|
Usage permissions |
Open to Members & Friends
|
Certification |
Self-Taught
|
Wiki-ID |
42
|
Label |
1.0" 1.5" 2.0"
|
Usage Notes
- Adjust bit with chuck key, then return chuck key to its holder
- Twist chuck by hand to ensure bit is centered, not stuck between two jaws
- Adjust table height/position by loosening rear left bolt, then turning right crank or pushing table sideways
- Ensure table hole is lined up with bit. If not, bit will drill through table and ruin it.
- Tighten rear-left bolt to secure table
- Ensure workpiece is secured
- Use depth-limiter knob to control max depth
Specs
- 10" range, 2 1/4" stroke
- 5 speeds (max 3020 RPM)
- 3.2A motor
- Battery laserline
- Worklight
- Rack & Pinion crank table adjust
- 45° tilt
- Drills holes in materials with more power and accuracy than a hand drill