Drill press (Mastercraft) ID:42: Difference between revisions

From Protospace Wiki
Jump to navigation Jump to search
m (Updated image link)
 
(5 intermediate revisions by 2 users not shown)
Line 1: Line 1:
{{Template:EquipmentPage
{{Equipment page
|toolname=Drill Press
| toolname = Drill Press
|model=Mastercraft 10" Drill Press with Laser
| model = Mastercraft 10" Drill Press with Laser
|serial=??
| serial = ??
|owner=Algenon
| owner = Algenon
|loanstatus=Donated to Protospace
| loanstatus = Donated to Protospace
|arrived=Pre 2013
| arrived = Pre 2013
|location=Metalworking Shop
| location = Metalworking Shop
|status=Working
| status = Working
|permission=Open to Members & Friends
| permission = Open to Members & Friends
|certification=Self-Taught
| certification = Self-Taught
|itemphoto=[[File:Drill_Press_Mastercraft.jpg|350px|thumb|right|]]
| id = 42
| itemphoto = [[File:42.jpg|350px|thumb|right|]]
}}
}}


Line 34: Line 35:
* Worklight
* Worklight
* Rack & Pinion crank table adjust
* Rack & Pinion crank table adjust
* 45' tilt
* 45° tilt
* Drills holes in materials with more power and accuracy than a hand drill
* Drills holes in materials with more power and accuracy than a hand drill

Latest revision as of 00:53, 26 November 2016

← Back to tools we have

42.jpg
Type Drill Press
Make/Model Mastercraft 10" Drill Press with Laser
Serial number ??
Original owner Algenon
Loan status Donated to Protospace
Arrival date Pre 2013
Location Metalworking Shop
Functional status Working
Usage permissions Open to Members & Friends
Certification Self-Taught
Wiki-ID 42
Label 1.0" 1.5" 2.0"

Usage Notes

  • Adjust bit with chuck key, then return chuck key to its holder
  • Twist chuck by hand to ensure bit is centered, not stuck between two jaws
  • Adjust table height/position by loosening rear left bolt, then turning right crank or pushing table sideways
  • Ensure table hole is lined up with bit. If not, bit will drill through table and ruin it.
  • Tighten rear-left bolt to secure table
  • Ensure workpiece is secured
  • Use depth-limiter knob to control max depth

Specs

  • 10" range, 2 1/4" stroke
  • 5 speeds (max 3020 RPM)
  • 3.2A motor
  • Battery laserline
  • Worklight
  • Rack & Pinion crank table adjust
  • 45° tilt
  • Drills holes in materials with more power and accuracy than a hand drill