Bicycle tire jig ID:114

From Protospace Wiki
Revision as of 00:18, 6 November 2018 by Ian Oliver (talk | contribs) (removed tool from Protospace)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

← Back to tools we have

114.jpg
This article is about a tool that is no longer at Protospace.
Further information can be found below.
  • Type: Bicycle Tire Truing/Centering Jig
  • Make/Model: Velomann
  • Serial Number: ??
  • Original Owner: Travis
  • Removed by: an unknown person
  • Removal Reason: unknown reason
  • Loan Status: Semi-Permanent Loan
  • Arrival Date: Pre-2013
  • Removal Date: unknown date
  • Replacements: none yet
  • Location: Storage Shelf/Bike Cart
  • Functional Status: Working
  • Usage Permissions: Open to Members
  • Certification: None
  • Wiki-ID: 114

Usage Notes

  • Used to straighten and inspect spoked tire rims
  • Lower guide to bottom
  • Place removed wheel in forks
  • Adjust guide upwards until near wheel
  • Adjust side pins if being used
  • Spin wheel and check for true
  • Make adjustments using appropriately sized spoke tool