3D printer, MJM (3D Systems InVision si2)

From Protospace Wiki
Jump to navigation Jump to search

← Back to tools we have

[[File:{{{id}}}.jpg|250px]]
Type Professional 3D printer
Make/Model 3D Systems InVision si2
Serial number ??
Original owner My Sewing Room / Shannon / ARCHEloft ?
Loan status Unclear if donation to Protospace or long-term loan
Arrival date Fall 2015
Location 3D Printer Village
Functional status Functional, but dedicated laptop must not be allowed to connect to the Internet
Usage permissions Open to full members
Certification Demo (?) (talk to Aleks R)
Wiki-ID [[{{{id}}}]]
Label 1.0" 1.5" 2.0"


Do not allow this machine's host computer to connect to the Internet! This could render the materials we have unusable if it realizes they are expired.

Overview

This is professional 3D printer made by 3D Systems in 2003. It uses a process called Multi-Jet Modeling, which is similar to inkjet, to build a model one layer at a time. It deposits a layer, consisting of both acrylic model material and wax support material, and then cures the model material all at once using an arc lamp. After printing, the wax is melted off to expose the model.

This machine must not be allowed to realized that the date has passed 2007, because it will realize that the model material is expired and refuse to use it (even though it still works). To accomplish this, it is equipped with a dedicated air-gapped laptop, which has the machine's software installed on it. Files may be transferred to this computer using flash drives or other methods that do not involve connecting it to the network.

The model material is extremely hazardous in just about every imaginable way, but the support material is just common paraffin. The UV light from the arc lamp is also hazardous.

Documents

To do: Copy document links over from the lists