85
edits
CNC router, wood (Precix) ID:153: Difference between revisions
→Machine History
Michael.fiss (talk | contribs) |
Michael.fiss (talk | contribs) |
||
| Line 271: | Line 271: | ||
Going though the machine it was found that the X and Y motors were both burned out and had to be replaced. The encoders on all axis were replaced and the motor drivers were also all replaced. The controller computer, and interface cards were also replaced at this time due to poor/wanting/or no documentation on parts or interfaces. | Going though the machine it was found that the X and Y motors were both burned out and had to be replaced. The encoders on all axis were replaced and the motor drivers were also all replaced. The controller computer, and interface cards were also replaced at this time due to poor/wanting/or no documentation on parts or interfaces. | ||
[[File:Motion system breakdown.png|left|thumb|722x722px|Motion system breakdown (there is a error in this image, | [[File:Motion system breakdown.png|left|thumb|722x722px|Motion system breakdown (there is a error in this image, the servo driver is a G320X not G520X)]] | ||
On May 8th 2021 the CNC made it's first official project, a 4' x 5' art piece that was hanging in Protospace until July 2024. | On May 8th 2021 the CNC made it's first official project, a 4' x 5' art piece that was hanging in Protospace until July 2024. | ||
The controller was changed in Aug due to the Galil DMC-1803 card not wanting to register in the system. We have moved to a Smoothstep board with a C25XP integrated card mounted to it. | The controller was changed in Aug due to the Galil DMC-1803 card not wanting to register in the system. We have moved to a Smoothstep board with a C25XP integrated card mounted to it. | ||
== References == | |||
[[Category:Woodworking tools]] | [[Category:Woodworking tools]] | ||
[[Category:Showcase tools]] | [[Category:Showcase tools]] | ||