Laser Cutter, Thunder Nova 51 ID:178: Difference between revisions

no edit summary
No edit summary
Line 160: Line 160:
[[File:QBS18yYAzsAniPC4z1YldOjDYHWiqd4A9A.png|thumb|Thunder/Chiller Interconnect Wiring]]
[[File:QBS18yYAzsAniPC4z1YldOjDYHWiqd4A9A.png|thumb|Thunder/Chiller Interconnect Wiring]]
The Thunder simply assumes the chiller is operating normally unless it is told otherwise. If any part of the alarm signal path is disconnected or broken, the Thunder will not be aware of problems with the chiller.[https://support.thunderlaserusa.com/portal/en/kb/articles/chiller-alarm-signal-and-cable-troubleshooting-guide-for-water-protect-error-2-8-2022#2_Check_Wiring_at_the_machine_socket]
The Thunder simply assumes the chiller is operating normally unless it is told otherwise. If any part of the alarm signal path is disconnected or broken, the Thunder will not be aware of problems with the chiller.[https://support.thunderlaserusa.com/portal/en/kb/articles/chiller-alarm-signal-and-cable-troubleshooting-guide-for-water-protect-error-2-8-2022#2_Check_Wiring_at_the_machine_socket]
== Maintenance ==
[https://support.thunderlaserusa.com/portal/en/kb/articles/preventative-maintenance-checklist#Nova_Series Thunder Laser Preventative Maintenance Checklist]


==Documentation==
==Documentation==