131
edits
Alarm: Difference between revisions
→Alarm Code: added screenshot
Jamie.frost (talk | contribs) (updated with 2 panels and specifics on what to expect) |
Jamie.frost (talk | contribs) (→Alarm Code: added screenshot) |
||
| Line 1: | Line 1: | ||
=== Alarm Panels === | ===Alarm Panels=== | ||
The Protospace alarm panels are located near the front and back entrances. | The Protospace alarm panels are located near the front and back entrances. | ||
=== Disarm - First In === | ===Disarm - First In=== | ||
''When armed, opening a door will start the activation sequence, where the panels will sound a continuous tone. Don't Panic.'' | ''When armed, opening a door will start the activation sequence, where the panels will sound a continuous tone. Don't Panic.'' | ||
| Line 11: | Line 11: | ||
If the correct code is not entered within about a minute, the full alarm siren will be activated. The same code is still used in full alarm state. | If the correct code is not entered within about a minute, the full alarm siren will be activated. The same code is still used in full alarm state. | ||
=== Arm - Last Out === | ===Arm - Last Out=== | ||
''The alarm must be armed whenever Protospace is being left <u>'''vacant'''</u>, regardless of the length of time a person thinks they will be gone.'' | ''The alarm must be armed whenever Protospace is being left <u>'''vacant'''</u>, regardless of the length of time a person thinks they will be gone.'' | ||
To arm the alarm, it must be in 'Ready' status: | To arm the alarm, it must be in 'Ready' status: | ||
# Ensure all exterior doors are closed and locked - all doors and locks are monitored by the alarm and it will not arm if something is unlocked or open. | #Ensure all exterior doors are closed and locked - all doors and locks are monitored by the alarm and it will not arm if something is unlocked or open. | ||
# Ensure that no motion sensors are triggered - You may need to stand still for a few extra seconds if you just walked to the door. | #Ensure that no motion sensors are triggered - You may need to stand still for a few extra seconds if you just walked to the door. | ||
# When the panel indicates "Ready" - Enter the alarm code, no other buttons need to be pressed. | #When the panel indicates "Ready" - Enter the alarm code, no other buttons need to be pressed. | ||
# An exit delay will be started of 1-2 minutes signified by a 1Hz chirp. During this time you can temporarily open the door to exit, then the alarm will be armed. | #An exit delay will be started of 1-2 minutes signified by a 1Hz chirp. During this time you can temporarily open the door to exit, then the alarm will be armed. | ||
== Alarm | ==Alarm Integration== | ||
Vetted members can see the alarm code here: https://my.protospace.ca/cards | Vetted members can see the alarm code here: https://my.protospace.ca/cards | ||
Vetted members can see the alarm status on the portal, in the Stats section of the home page: | |||
[[File:Alarmstatus.png|alt=Spaceport Screenshot|left|thumb|Example of how the alarm integration is displayed on the Spaceport member stats screen.]] | |||
<br /> | |||