131
edits
Alarm: Difference between revisions
updated with 2 panels and specifics on what to expect
(Added alarm operation instructions and light switch location) |
Jamie.frost (talk | contribs) (updated with 2 panels and specifics on what to expect) |
||
| Line 1: | Line 1: | ||
The Protospace alarm | === Alarm Panels === | ||
The Protospace alarm panels are located near the front and back entrances. | |||
=== Disarm - First In === | |||
''When armed, opening a door will start the activation sequence, where the panels will sound a continuous tone. Don't Panic.'' | |||
<u>To disarm the alarm simply punch in the [https://my.protospace.ca/cards alarm code]</u>, no other buttons need to be pressed. | |||
A 5 pulse tone will be heard and the alarm will be disarmed. | |||
If the correct code is not entered within about a minute, the full alarm siren will be activated. The same code is still used in full alarm state. | |||
=== Arm - Last Out === | |||
''The alarm must be armed whenever Protospace is being left <u>'''vacant'''</u>, regardless of the length of time a person thinks they will be gone.'' | |||
To arm the alarm, it must be in 'Ready' status: | |||
# Ensure all exterior doors are closed and locked - all doors and locks are monitored by the alarm and it will not arm if something is unlocked or open. | |||
# Ensure that no motion sensors are triggered - You may need to stand still for a few extra seconds if you just walked to the door. | |||
# When the panel indicates "Ready" - Enter the alarm code, no other buttons need to be pressed. | |||
# An exit delay will be started of 1-2 minutes signified by a 1Hz chirp. During this time you can temporarily open the door to exit, then the alarm will be armed. | |||
== Alarm Code == | |||
Vetted members can see the alarm code here: https://my.protospace.ca/cards | Vetted members can see the alarm code here: https://my.protospace.ca/cards | ||