2
edits
Laser cutter, large (Rabbit Laser RL-80-1290) ID:6: Difference between revisions
Laser cutter, large (Rabbit Laser RL-80-1290) ID:6 (view source)
Revision as of 18:06, 4 May 2023
, 4 May 2023→"Soft stop" when trying to test outline of job: Added information to make this fix work.
Pat.spencer (talk | contribs) (→Monthly: Added a picture of the cleaned bed) |
(→"Soft stop" when trying to test outline of job: Added information to make this fix work.) |
||
| Line 134: | Line 134: | ||
======"Soft stop" when trying to test outline of job====== | ======"Soft stop" when trying to test outline of job====== | ||
Check the job origin on the lasercut software. Button on the top that says “set stop position” (red square with blue arrow). Open dialog box and de-select 'Fixed Pos'. Then use cursor to select a new start position on display. | Check the job origin on the lasercut software. Button on the top that says “set stop position” (red square with blue arrow). Open dialog box and de-select 'Fixed Pos'. Then use cursor to select a new start position on display. | ||
Then manually move the laser head to the approximate position of your new start position using the arrows on the machine. | |||
======Jobs always start in the top left 0,0 of bed, instead of where the laser is====== | ======Jobs always start in the top left 0,0 of bed, instead of where the laser is====== | ||