1
edit
3D printer, FFF (ORD Bot Hadron) ID:2: Difference between revisions
3D printer, FFF (ORD Bot Hadron) ID:2 (view source)
Revision as of 04:06, 26 January 2023
, 26 January 2023→Usage Notes
m (minor reformatting, replaced link with one to wayback, as the original link is dead) |
|||
| Line 23: | Line 23: | ||
2 new Ordbots were also built by Alan, including E3D Titan extruders and v6 hotends! Makes printing a lot of parts a little easier. | 2 new Ordbots were also built by Alan, including E3D Titan extruders and v6 hotends! Makes printing a lot of parts a little easier. | ||
* [https://en.wikipedia.org/wiki/Fused_deposition_modeling FDM] 3D Printer | *[https://en.wikipedia.org/wiki/Fused_deposition_modeling FDM] 3D Printer | ||
* [http://e3d-online.com/E3D-v6 E3D-v6 Extruder] | *[http://e3d-online.com/E3D-v6 E3D-v6 Extruder] | ||
==Usage Notes== | ==Usage Notes== | ||
* Capable of printing with PLA or ABS, but leave it using PLA generally to avoid jams. | *Capable of printing with PLA or ABS, but leave it using PLA generally to avoid jams. | ||
* '''Donation required if using common materials.''' | *'''Donation required if using common materials. ($0.05/g)''' | ||
Hadron II is configured to print from Repedier on the main computer in the printer room. | |||
Hadron III is experimentally configured to print from Octoprint. 172.17.18.52 | |||