26
edits
Laser cutter, large (Rabbit Laser RL-80-1290) ID:6: Difference between revisions
Laser cutter, large (Rabbit Laser RL-80-1290) ID:6 (view source)
Revision as of 18:08, 21 November 2022
, 21 November 2022→"Soft stop" when trying to test outline of job
Craig.pearce (talk | contribs) |
Craig.pearce (talk | contribs) |
||
| Line 137: | Line 137: | ||
'''When tracking the contour (using the 'test' button) the laser pauses and restarts while moving in Y-axis direction''' | '''When tracking the contour (using the 'test' button) the laser pauses and restarts while moving in Y-axis direction''' | ||
Similar to the above issue, the local original is set. Use the arrow keys until the job name is highlighted and press enter, press the right arrow key to select "Clear logical origin" and press enter again. Re-test your job and it should function normally. | |||
======Jobs appear to be positioned at absolute coordinates specified in LaserCut, instead of relative to where the laser head is====== | ======Jobs appear to be positioned at absolute coordinates specified in LaserCut, instead of relative to where the laser head is====== | ||