CNC router, wood (Precix) ID:153: Difference between revisions

CNC router, wood (Precix) ID:153 (view source)

Revision as of 20:17, 1 June 2022

5 bytes removed , 1 June 2022

Changed bed T-Nut threads from 1/3-20 to 1/4-20 (was a typo)

Gerritt.hooff

1

edit

@@ Line 43: / Line 43: @@
 ====Hold down method====
-The hold-down table has a grid of threaded T-Nuts that can/should be used to hold down your material. If you wish to make your own sacrificial / holding system, simply prepare to fasten it down to this grid pattern.   Use the 1/3-20 screws (or bolts if you are gentle).
+The hold-down table has a grid of threaded T-Nuts that can/should be used to hold down your material. If you wish to make your own sacrificial / holding system, simply prepare to fasten it down to this grid pattern.   Use the 1/4-20 screws (or bolts if you are gentle).
-The spacing of the threaded nuts is 4.861"  (123.63mm) on both the X and also Y axis.  Wtf is that spacing?  Why not a nice round English or Metric spacing?   Well, that is the spacing of the T-channels in the underlying bed.  Get used to it and make your templates.
+The spacing of the threaded nuts is 4.861" (123.63mm) on both the X and also Y axis.  Wtf is that spacing?  Why not a nice round English or Metric spacing?   Well, that is the spacing of the T-channels in the underlying bed.  Get used to it and make your templates.
 [[File:153-Precix-bed-Nuts-spacing.jpg|150x150px|Precix Mounting Nut Spacing]]
@@ Line 91: / Line 91: @@
 '''Unsuitable stock materials''': '''Zero''' metal, metal alloy, or metal composites are to be cut on this machine
-=== Machine Procedures ===
+===Machine Procedures===
 [https://forum.protospace.ca/t/precix-fixture-plate-spoil-design-revision/1391/70 Leveling the bed]<br />[https://forum.protospace.ca/t/mach3-control-screen/1517 Change Z Probe Speed]
-=== Slated Improvements ===
+===Slated Improvements===
 Cut a new dust boot