248
edits
Laser cutter, large (Rabbit Laser RL-80-1290) ID:6: Difference between revisions
Laser cutter, large (Rabbit Laser RL-80-1290) ID:6 (view source)
Revision as of 01:56, 28 April 2022
, 28 April 2022→Troubleshooting
(added troubleshooting) |
|||
| Line 80: | Line 80: | ||
<br /> | <br /> | ||
== Troubleshooting == | ==Troubleshooting== | ||
====== "Soft stop" when trying to test outline of job ====== | ======"Soft stop" when trying to test outline of job====== | ||
Check the job origin on the lasercut software. Button on the top that says “set stop position” | Check the job origin on the lasercut software. Button on the top that says “set stop position” | ||
====== Jobs always start in the top left 0,0 of bed, instead of where the laser is ====== | ======Jobs always start in the top left 0,0 of bed, instead of where the laser is====== | ||
Machine local origin is set; use the arrow keys until the job name is highlighted and press enter, press the right arrow key to select "Clear logical origin" and press enter again | Machine local origin is set; use the arrow keys until the job name is highlighted and press enter, press the right arrow key to select "Clear logical origin" and press enter again | ||
====== Jobs appear to be positioned at absolute coordinates specified in LaserCut, instead of relative to where the laser head is ====== | ======Jobs appear to be positioned at absolute coordinates specified in LaserCut, instead of relative to where the laser head is====== | ||
"Immediate mode" checkbox is enabled | "Immediate mode" checkbox is enabled | ||
====== Arrowkeys on keypad don't do anything ====== | ======Arrowkeys on keypad don't do anything====== | ||
Press the Z-axis button to exit Z-axis up/down mode | Press the Z-axis button to exit Z-axis up/down mode | ||
<br /> | |||
<br /> | <br /> | ||
==Maintenance== | ==Maintenance== | ||