268
edits
Laser cutter, large (Rabbit Laser RL-80-1290) ID:6: Difference between revisions
Laser cutter, large (Rabbit Laser RL-80-1290) ID:6 (view source)
Revision as of 07:09, 11 April 2022
, 11 April 2022→Repairs Needed
| Line 123: | Line 123: | ||
**Avoid contaminating linear rails or optics | **Avoid contaminating linear rails or optics | ||
== | ==To Do List== | ||
Replace shocks on lid | Replace shocks on lid | ||
| Line 129: | Line 129: | ||
Bed is warped. X max side of the bed projects up. | Bed is warped. X max side of the bed projects up. | ||
Air tube hits the X-max limit switch on right side. | Air tube hits the X-max limit switch on right side. Adjust it so it doesn't. Better yet, tee up a replacement for this tube at the current one is crusty and still. | ||
Refill + maintain a list of consumables for this tool - gloves, syringes for greasing bearings, brake cleaner, size set screw (M3?). Laser cut targets (we are out of laser head targets) | |||
Size the set screws for Y and X axis bearings | |||
=== | ==Benchmarks== | ||
FRONT RIGHT side of bed:100% power, 35 mm/s | ===2022-04-10=== | ||
The following settings should cut a 1"x1" square on 3 mm Baltic birch: | |||
FRONT RIGHT side of bed: 100% power, 35 mm/s | |||
BACK LEFT side of bed: 100% power, 50 mm/s | BACK LEFT side of bed: 100% power, 50 mm/s | ||