254
edits
CNC router, wood (Precix) ID:153: Difference between revisions
CNC router, wood (Precix) ID:153 (view source)
Revision as of 20:53, 25 November 2021
, 25 November 2021Added link to old thread in Google Groups articles mentioned in Machine History
Pat.spencer (talk | contribs) (Added image of Mach3 screenset) |
Pat.spencer (talk | contribs) (Added link to old thread in Google Groups articles mentioned in Machine History) |
||
| Line 76: | Line 76: | ||
Over the summer the machine was idle due to the 2020 COVID-19 Pandemic. | Over the summer the machine was idle due to the 2020 COVID-19 Pandemic. | ||
During this time Members Connor G. , Danny P. and Zachary J. started to work though the machine and evaluate it's condition and begin it's acceptance work. This work is documented on the admin google group post "CNC router planning/build thread", authored by Zachary J. | During this time Members Connor G. , Danny P. and Zachary J. started to work though the machine and evaluate it's condition and begin it's acceptance work. This work is documented on the admin google group post "[https://groups.google.com/g/protospace-administration/search?q=CNC%20router%20planning%2Fbuild%20thread CNC router planning/build thread]", authored by Zachary J. | ||
Going though the machine it was found that the X and Y motors were both burned out and had to be replaced. The encoders on all axis were replaced and the motor drivers were also all replaced. The controller computer, and interface cards were also replaced at this time due to poor/wanting/or no documentation on parts or interfaces. | Going though the machine it was found that the X and Y motors were both burned out and had to be replaced. The encoders on all axis were replaced and the motor drivers were also all replaced. The controller computer, and interface cards were also replaced at this time due to poor/wanting/or no documentation on parts or interfaces. | ||