CNC router, wood (Precix) ID:153: Difference between revisions

===Machine Overview===

'''Bed size''': 5'(1.524m) x 10'(3.048m) x 11"(0.2794m)

'''Max spindle RPM''':18000RPM ([https://www.hsdusa.com/bo/allegati/Files/1371_y6162y0016_mt1073-120-er25-220v-dx-18_18_2_.pdf spindle is a AT/MT1073-140 from HSD mechatronics])  

'''Spindle power''': 2.2KW, 3HP

'''Spindle type''': VFD based motor. (VFD is a commander SK from control tech [http://www.control-pro.ru/doc_pdf/commander_sk/product_data.pdf user manual], [https://inverterdrive.com/file/Commander-SK-Advanced-User-Guide advance user manual])  

'''Max feed rate''': 750inch/min

'''Tool holder type''': ER25 collets, we have 1/8", 1/4",3/8",1/2" (as of 05.11.2021)

Automatic tool changer: No

'''File units''': Default units are imperial. you may switch to metric using gcode commands, it is recommended that you export imperial code.  

File type accepted: .tap, .gcode, .txt

'''Machine control software suite''': Mach3 skinned with [http://www.physanon.com/pa-mach-3-screen-set/ physics anonymous Mach pack]  

Will do 3 axis moves?:Yes

'''Hold down method''': Screws, nails, clamps(must make these). Vacuum table in the future.

Note that the hold-down table has a grid of threaded T-Nuts that you can/should use to hold down your material. If you wish to make your own sacrificial / holding system, simply prepare to fasten it down to this grid pattern.  The spacing of the threaded nuts is 4.861"  (123.63mm) on both the X and also Y axis.  Wtf is that spacing?  Why not a nice round English or Metric spacing?  Well, that is the spacing of the channels in the underlying bed.  Get used to it and make your templates.

'''Dust collection'''?: Yes, separate from main dust collector

'''Probing''': plate style. Plate is 1/4" (as of 06.01.2021) thick.  

'''Suitable stock materials''': Wood, plastics, foams, other.

'''Unsuitable stock materials''': '''Zero''' metal, metal alloy, or metal composites are to be cut on this machine  

<br />