296
edits
CNC router, benchtop (SIENCI LongMill) ID:143: Difference between revisions
CNC router, benchtop (SIENCI LongMill) ID:143 (view source)
Revision as of 00:27, 12 November 2021
, 12 November 2021added links to software on the PI
Pat.spencer (talk | contribs) mNo edit summary |
Aerobatpat (talk | contribs) m (added links to software on the PI) |
||
| Line 21: | Line 21: | ||
There is a ton of valuable reference material on their "Resources" website. See -> https://resources.sienci.com/view/lm-welcome/ | There is a ton of valuable reference material on their "Resources" website. See -> https://resources.sienci.com/view/lm-welcome/ | ||
'''Bed size''': 250mm x 340mm (10"x 13") | '''Bed size''': 250mm x 340mm (10"x 13"). The Z travel is 105mm. The clearance below the gantry is also about 105mm so this is the thickest material that could be mounted, although the router can be adjusted higher if the material has the right shape to clear the gantry. There is about a 60mm offset from the gantry to the router bit (in the Y axis) that could be used for taller pieces. | ||
'''Spindle''': Makita Trim Router Model RT0701C ( https://www.makitatools.com/products/details/RT0701C). The Makita Router has a 1/4" collet, and a also a 1/8" collet insert. Manually controlled, this router has variable speed spindle from 10,000 to 30,000 RPM. It is manually controlled (Not controlled in software). There is a collection of bits in the red toolbox under the CNC. | '''Spindle''': Makita Trim Router Model RT0701C ( https://www.makitatools.com/products/details/RT0701C). The Makita Router has a 1/4" collet, and a also a 1/8" collet insert. Manually controlled, this router has variable speed spindle from 10,000 to 30,000 RPM. It is manually controlled (Not controlled in software). There is a collection of bits in the red toolbox under the CNC. | ||
| Line 29: | Line 29: | ||
'''Machine Control:''' GRBL on a SIENCI Milling Labs LONGBOARD Controller. | '''Machine Control:''' GRBL on a SIENCI Milling Labs LONGBOARD Controller. | ||
'''User Interface:''' a | '''User Interface:''' a Raspberry PI is connected to the Controller via USB. It has [https://resources.sienci.com/view/gs-installation/ GSender], [https://winder.github.io/ugs_website/ Universal G-Code Sender (UGCS)]as well as[https://github.com/vlachoudis/bCNC bCNC] installed. | ||
'''RaspPi Login''': It is autologon on startup, so you do not need to log on. But if you need it for any reason, it is pi/Protospace. | '''RaspPi Login''': It is autologon on startup, so you do not need to log on. But if you need it for any reason, it is pi/Protospace. | ||