254
edits
CNC router, benchtop (SIENCI LongMill) ID:143: Difference between revisions
CNC router, benchtop (SIENCI LongMill) ID:143 (view source)
Revision as of 23:27, 6 November 2021
, 6 November 2021Added tool details.
Pat.spencer (talk | contribs) m (Added reference links →Reference links) |
Pat.spencer (talk | contribs) m (Added tool details.) |
||
| Line 22: | Line 22: | ||
'''Bed size''': 250mm x 340mm (10"x 13") | '''Bed size''': 250mm x 340mm (10"x 13") | ||
'''Spindle''': Makita Trim Router Model RT0701C ( https://www.makitatools.com/products/details/RT0701C). | '''Spindle''': Makita Trim Router Model RT0701C ( https://www.makitatools.com/products/details/RT0701C). The Makita Router has a 1/4" collet, and a 1/8" collet insert, and a variable speed spindle from 10,000 to 30,000 RPM. It is manually controlled (Not controlled in GRBL). There is a collection of bits in the red toolbox under the CNC. | ||
Currently, the Spindle power is not controlled by the CNC Controller and must be turned On/Off manually. This is on the list of improvements. | Currently, the Spindle power is not controlled by the CNC Controller and must be turned On/Off manually. This is on the list of improvements. | ||
| Line 76: | Line 76: | ||
====Reference links==== | ====Reference links==== | ||
* CNC Basics - What You Need To Get Started -> https://www.youtube.com/watch?v=lQ-MYnyxh7M (Has a LongMill in the demo) | *CNC Basics - What You Need To Get Started -> https://www.youtube.com/watch?v=lQ-MYnyxh7M (Has a LongMill in the demo) | ||
* CNC Basics - Make Your First Cut -> https://www.youtube.com/watch?v=_Rt5sC9DrEQ&t=297s | *CNC Basics - Make Your First Cut -> https://www.youtube.com/watch?v=_Rt5sC9DrEQ&t=297s | ||
* CNC Basics - How to use Easel (free CNC software) -> https://iliketomakestuff.com/how-to-use-easel/ | *CNC Basics - How to use Easel (free CNC software) -> https://iliketomakestuff.com/how-to-use-easel/ | ||
* Fusion 360 CAM tutorial for CNC beginners - Making "Kevin" -> https://www.youtube.com/watch?v=iqnvzxuXFTQ | *Fusion 360 CAM tutorial for CNC beginners - Making "Kevin" -> https://www.youtube.com/watch?v=iqnvzxuXFTQ | ||
* | * | ||
<hr> | <hr> | ||
===Planned Updates=== | ===Planned Updates=== | ||