CNC router, benchtop (SIENCI LongMill) ID:143: Difference between revisions

CNC router, benchtop (SIENCI LongMill) ID:143 (view source)

204 bytes added , 28 October 2021

296

edits

@@ Line 18: / Line 18: @@
 The controller is an Arduino running GRBL.
-<b>Bed size</b>: 250mm x 340mm (10"x 13")
+'''Bed size''': 250mm x 340mm (10"x 13")
 Spindle:Makita Trim Router (Variable Speed)
@@ Line 26: / Line 26: @@
 File units: Default units are Metric.
-<b>Machine control software suite</b>: GRBL on a SIENCI Milling Labs Controller.  The controller is also connected to a RaspBerry PI which has Universal G-Code Sender (UGCS) as well as bCNC installed.
+'''Machine control software suite''': GRBL on a SIENCI Milling Labs Controller.  The controller is also connected to a RaspBerry PI which has Universal G-Code Sender (UGCS) as well as bCNC installed.
-<b>RaspPi Login</b>: pi/Protospace
+'''RaspPi Login''': pi/Protospace
-Will do 3 axis moves?:Yes
+'''Hold down method''': Screws, nails, clamps(must make these).
+The mounting board has threaded inserts on a 10cm x 10cm grid.  You can supply your own holddown board with whatever system you wish.  Simply drill holes in your board so that you can mount it to these threaded inserts.
-Hold down method: Screws, nails, clamps(must make these).
+'''Dust collection?''': Yes, requires a shopVac.
-Dust collection?: Yes, requires a shopVac.
 Probing: plate style. Plate is 10mm thick as well as X and Y 10mm offset.