Milling machine, CNC (Tormach PCNC 1100) ID:49: Difference between revisions

Milling machine, CNC (Tormach PCNC 1100) ID:49 (view source)

Revision as of 16:40, 27 June 2021

1,930 bytes added , 27 June 2021

updated with specs, removed old links, added more useful stuff

Zachary.jeffrey

16

edits

@@ Line 7: / Line 7: @@
 {{Equipment page
 | toolname = CNC Mill (Tormach)
-| model = [http://www.tormach.com/product_pcnc_main.html PCNC 1100 Personal CNC Mill Series I]
+| model = PCNC 1100 Personal CNC Mill Series 2
 | serial = 231  11-2006
 | owner = Protospace
@@ Line 27: / Line 27: @@
 ==Specs==
-See [http://www.tormach.com/product_pcnc_main.html#techspecs Tormach's website].
+This is a PCNC 1100 series 2.
+•Table Size – 34" x 9.5"
+•Table Slots – 2 drainage/alignment slots, 3 T-Slots 0.625" (5/8") – center slot -0.00 + 0.004" – outer slots – 0.000 + 0.008"
+•Work envelope (X-, Y-, Z-axis) – 18" x 9.5" x 16.5"
+•Spindle Nose Diameter – 3 3/8"
+•Spindle Taper – BT30 with spindle lock for easy single hand drawbar operation.
+•Spindle Speed Range RPM – 100 to 5140. Computer controlled spindle speed and direction with regenerative braking from a 1.5 hp induction motor (2 hp peak).
+•Cartridge style spindle with V-belt transmission. There are two overlapping speed ranges. Low belt speed is 100 – 2000 RPM, high belt is 250 – 5140 RPM
+•Spindle Center to Column Face – 11"
+•Maximum Weight of Workpiece – 500 lbs.
+•Max spindle nose to table – 17"
+•Forward opening electrical cabinet. This unique design allows service even when the machine is placed near to a wall.
+•Weight net / shipping. – 1130 / 1325 lbs
+•Operating temperature range 45 to 100 oF (7 to 38 oC)
+•Rapid traverse X, Y = 90 IPM, Z = 65 IPM
+•NEMA 34 stepper motors on X, Y and Z
+•Single Shot Lube Pump
+•15 point lubrication. Each axis has an oil distribution channel milled full length on left and right vertical and horizontal surfaces (all 4 sliding surfaces) plus an oil line plumbed directly to the ball nut assembly.
+•Precision ground ball screws in the X, Y and Z motion. ISO/DIN P4 grade.
+•Complete way covers.
+See [https://tormach.com/support/mill/pcnc-1100-legacy-documents Tormach's website] for more info.
+<br />
+== Useful docs ==
+[https://tormach.com/docs/download/assetlink/asset_id/584 Operator Manual]
+[https://tormach.com/docs/download/assetlink/asset_id/184 Usb related motion failures, usage note READ THIS BEFORE USING]
+[https://tormach.com/docs/download/assetlink/asset_id/205 Probe usage service bulletin]
+[https://groups.google.com/g/protospace-discuss/c/9vPD54YSFsU/m/rOCAiESsAwAJ Pathpilot simulator] follow instructions on the list.