CNC router, mini (TD 3040) ID:141: Difference between revisions

CNC router, mini (TD 3040) ID:141 (view source)

255 bytes added , 2 March 2020

296

edits

@@ Line 30: / Line 30: @@
 == Usage ==
-The machine runs on Mach3, the same software previously used on Tormac. Anyone who know how to use the Tormac, or know what you are doing, or can hit E-Stop fast enough, or well, is curious enough and want to play with it, are welcome to use the machine.
+The machine runs on Mach3, the same software previously used on Tormac. Anyone who knows how to use the Tormac, or know what you are doing, or can hit E-Stop fast enough, or well, is curious enough and want to play with it, are welcome to use the machine.
 The basic procedure:
@@ Line 37: / Line 37: @@
   - Launch Mach3 program, turn on CNC machine, do Homing sequence and Stock origin sequence
   - Feed this GCode into Mach3 and it will control the CNC machine to churn out the parts.
+ - Possibly edit your G-Code to tweak a few things to get it right
+There is an introductory Fusion360 class for those who want to use this or the Tormac Metal CNC machine.
+There will also be a specific MiniCNC class offered once we have the bugs ironed out and the documentation created.
+Step by Step [[MiniCNCBasics|Mini CNC Basic Operations]] instruction.
 Initial Draft "How to" document ==> [http://wiki.protospace.ca/images/1/15/141-Mini-CNC-Basics.pdf 141-Mini-CNC-Basics.pdf]
-There is an introductory Fusion360 class for those who want to use this or the Tormac Metal CNC machine.
 == Enclosure ==