844
edits
Laser cutter, large (Rabbit Laser RL-80-1290) ID:6: Difference between revisions
Laser cutter, large (Rabbit Laser RL-80-1290) ID:6 (view source)
Revision as of 19:33, 9 November 2019
, 9 November 2019→Specs: clarified thickness and added kerf
m (fixed punctuation error) |
Ian Oliver (talk | contribs) (→Specs: clarified thickness and added kerf) |
||
| Line 64: | Line 64: | ||
** Front panel of machine can be removed or folded down to insert pieces longer than 3' | ** Front panel of machine can be removed or folded down to insert pieces longer than 3' | ||
* Controller: [http://www.leetro.com/english/sale/1-2.html Leetro MPC 6525A] | * Controller: [http://www.leetro.com/english/sale/1-2.html Leetro MPC 6525A] | ||
* Can cut or etch up to 1/ | * Can cut or etch up to 1/4" (6 mm)-thick light materials such as woods and some plastics in one pass, or thicker materials in multiple passes | ||
* Cut kerf is approximately 0.3 mm (full width); you should measure it with your material if it's important to your project | |||
{{box.Warning|Do not cut any chlorinated synthetics (some types of plastics and rubbers)! The HCl vapors will damage the machine.}} | {{box.Warning|Do not cut any chlorinated synthetics (some types of plastics and rubbers)! The HCl vapors will damage the machine.}} | ||