23
edits
How to run the PA System: Difference between revisions
no edit summary
(How to operate the PA system.) |
No edit summary |
||
| Line 1: | Line 1: | ||
How to Turn on and off the PA system | |||
== How to Turn on and off the PA system == | |||
The PA system now at Protospace is available for everyone's use. As it is a Pro Audio PA system, it's operation is a bit more involved than a simple stereo. Here's the info you need in point form... | The PA system now at Protospace is available for everyone's use. As it is a Pro Audio PA system, it's operation is a bit more involved than a simple stereo. Here's the info you need in point form... | ||
| Line 11: | Line 13: | ||
'''3.''' Make sure all sliders are DOWN ie OFF. | '''3.''' Make sure all sliders are DOWN ie OFF. | ||
The Speakers are all self powered: | |||
'''4.''' Go to each speaker, and either turn on, plug in, or both. Please don't adjust any knobs on the back of the speakers. | '''4.''' Go to each speaker, and either turn on, plug in, or both. Please don't adjust any knobs on the back of the speakers. | ||
5. The SUB also has a switch and may also need to be plugged in / turned on. | '''5.''' The SUB also has a switch and may also need to be plugged in / turned on. | ||
6. carefully bring up the master volume sliders. Left side should be about 3/10, right side about 5/10. Left side IS lower | '''6.''' carefully bring up the master volume sliders. Left side should be about 3/10, right side about 5/10. | ||
Left side IS lower output due to problem with speaker. (I will be fixing this soon) | |||
7. Start your source audio playing and carefully slide up channel 7 slider. | '''7.''' Start your source audio playing and carefully slide up channel 7 slider. | ||
If you require the wireless mic, it is wired on Channel 1. | If you require the wireless mic, it is wired on Channel 1. | ||
There are two switches on the mic itself. The little black switch is POWER, and the grey switch is MUTE. To use the mic, BOTH switches must be in the UP position. Once done, please remember to turn BOTH switches off to save batteries. | There are two switches on the mic itself. The little black switch is POWER, and the grey switch is MUTE. To use the mic, BOTH switches must be in the UP position. Once done, please remember to turn BOTH switches off to save batteries. | ||