23
edits
Air compressor, 80-gallon (Ingersoll Rand T30): Difference between revisions
Air compressor, 80-gallon (Ingersoll Rand T30) (view source)
Revision as of 04:16, 4 October 2014
, 4 October 2014no edit summary
No edit summary |
No edit summary |
||
| Line 14: | Line 14: | ||
==Specs== | ==Specs== | ||
This compressor is an industrial grade machine to be treated with some degree of respect. This 5HP compressor is electrically driven by 208V single phase available through the same pigtail that powers the TIG welder. | This compressor is an industrial grade machine to be treated with some degree of respect. This 5HP compressor is electrically driven by 208V single phase available through the same pigtail that powers the TIG welder. | ||
[[File:208V_pigtail.jpg|x250px]] | |||
This compressor is capable of substantially higher pressure than most air tools can tolerate, which is why its discharge pressure is regulated to 100 psi. Do not adjust this regulator without consulting with Kyle. Doing so may damage your equipment or hurt you seriously. | |||
[[File:Regulator_and_filter.jpg|x250px]] | |||
==Use and Maintenance== | ==Use and Maintenance== | ||
verbatim from the sticker right on the compressor but just in case you have not read it: | verbatim from the sticker right on the compressor but just in case you have not read it: | ||
| Line 25: | Line 32: | ||
Weekly | Weekly | ||
*Check for proper oil level | *Check for proper oil level | ||
[[File:Compressor_cranck_case.jpg|x250px]] | |||
Monthly | Monthly | ||