Tools we have

Notes

Fill in any data you know of/own in the following suggested format (alphabetically):

Tool Name (Brand/Color)
Tool Owner/Donator name if any.
Tool Ownership Status (Protospace property, on loan, semi-permanent loan [likely staying at PS but donor might take it back some day], private)
Tool Status (working/needs fixing/finicky/etc)
Tool Use Restrictions (Open to all, open to members only, ask owner first, read instructions first, must be trained/certified).

Please add pictures too.

Also, please amalgamate old content at bottom to new format, removing the old as you go. Delete this message when complete.

Treat tools with respect and care! Also clean them up and put them back before you leave :)

80W Chinese Laser Cutter with a 4' x 3' cutting area http://www.rabbitlaserusa.com/laser_RL1290.asp - Brian Queen - On Loan (August?) - Working - Must be certified
Makerbot cupcake CNC - ?? - ?? - ?? - ??
RapMan 3D Printer - Brian Queen - ?? - ?? - ??
Utilimaker 3D Printer - Brian Queen - ?? - Working okay, needs heated bed - ??

Compressor (big) - CPAA - PS Owned - Working - ??
Floor Jack (Certified/blue) - Tremaine "Dexter" - Semi-Permanent Loan - Working - Open To All
Socket/Wrench Set - Ben Reed - PS Owned - Working - Open To All

Hot Plate/Stirrer - James -

Compressor (small/black), Air Tank, Controls & Air Dryer - circuithacker & 19200baud - For use with Pick & Place as long as we are protospace members - Needs plumbing and wiring fix - ??
Lab Power Supply - ?? - ?? - ??
Oscilloscope (Kikusui COS5060 60Mhz) - Dan Damron - Working - Open to Members Only
Oscilloscope (Tektronics 2225 50Mhz) - ?? - ?? - ??
Pick & Place (Multitroniks) - ?? - ?? - Needs Fixing(?) - ??
Reflow SMT Station - Dan Damron - ?? - Working - Open to Members Only
SMT Hot Air Rework Station (with soldering tools)- Dan Damron - ?? - Working - Open to Members Only

Angle Grinder w/ case (Kawasaki/Green) - ?? - ?? - Working - ??
Bench Grinder (Baldor/Red) - ?? - ?? - Working - ??
Bench Grinder (Powerfist/Grey) - Tremaine "Dexter" - Donated to Protospace - Working - Open To All
Compressor (White) - ?? - ?? - Needs fixing, does not hold pressure above 25 psi, paired with yellow plasma cutter - ??
Drill Press - ?? - PS Owned - Working - Open to Members
Forge - ?? - ?? - ?? - ??
Lathe/Mill Combo (Craftex/Green) - Jim Akeson - Semi-Permanent Loan - Working - Must be Certified
Plasma Cutter (Miller, Small, Blue) - ?? - ?? - Working - ??
Plasma Cutter (Huge, Yellow) - ?? - ?? - Needs power cord, seals, paired with white compressor - ??
Tap & Die set (Mastercraft) - Tremaine - ?? - Working - ??
Vice (Small, Irwin) - ?? - ?? - Working - Open To All
Vice (Giant) - Joe Piche - Donated to Protospace - Working - Open To All

Band Saw (Green) - Group buy from Travis, Dan, Jim, Mike - PS Owned - Needs set screw, tensioner is broken - ??
Chop Saw (Ryobi/Blue) - ?? - ?? - Working - ??
Cutoff Saw (B&D) - ?? - ?? - Working - ??
Cutoff Saw (Red) - ?? - ?? - ?? - ??
Corded Drill (Dewalt/Yellow - ?? - ?? - Working - ??
Corded Dremel & Accessories - ?? - ?? - Working - ??
Cordless Drill (Orange) - ?? - ?? - Working - ??
Cordless Dremel & Case (Grey) - ?? - ?? - Working - ??
MaxNC 10 (Blue) - Brian Queen - ?? - Working - ??
Jiggaw (Skil/Black) - ?? - ?? - Working - ??
Joiner - Jim Akeson - ?? - ?? - ?? - ??
Planer - ?? - ?? - ?? - ??
Sander Mouse (Ryobi/Blue) - ?? - ?? - Working - ??
Scroll Saw (Dremel/Grey) - ?? - ?? - Working - ??
Scroll Saw (Mastercraft/Blue) - ?? - ?? - Working - ??
Table Saw - Jim Akeson - ?? - ?? - Needs motor installed - ??
Workmate - ?? - ?? - Working - ??

Tremaine:

4 1 ton vehicle jack stands
metric ratchet set with 3/8" and 1/4" drivers (6mm to 19mm sockets)
metric ratchet 1/2" driver, 1 short extender and 1 long, sockets from 12mm to 24mm (some deep impact)
metric crescent wrenches 8mm - 24mm
variety of wrenches, standard screwdrivers
Metric hex key set
tap & die set
Heat gun
Torque wrench
Breaker bar with 1/2" driver
Blowtorch (triggerstart)

(more to be added)

Mike Hermann

Dan VE6IBM