VCarve-Makerspace-Client-instructions

Protospace VCarve pro Makerspace Client Installation instructions

Protospace has purchased a license for a Makerspace version of VCerver pro. This license includes allowing a user to run a VCarve Pro Client at home, and then bring in the files to Protospace to output and submit to tot eh CNC.

The following instruction show you how to install VCarve Pro, licensed as a Client for Protospace. Note that this installation will not allow you to export G-CODE on the client PC, but instead you must bring the files into use on a licensed workstation.

Procedure:

Step 1) - Download the trial version of VCarve: https://www.vectric.com/free-trial/vcarve-pro and Install it on your PC

Step 2) - Launch the program and skip through the licensing questions and simply get it installed with a basic 3-axis mill (the default Mill)

Step 3) - License the software using the Protospace Makerspace Client License.

- Goto Help => About VCarve Pro Trial Edition...

- Select the Enter Makerspace ID button.

- Enter our code DF826-11F6F-F58EC-E23F9-AF8C9-2926F-45899

- Congratulations! You are now ready to run VCarve.