Reopen

Protospace COVID 19 Reopening Plan

This is a living document, and subject to change while the group decides on it's content. Don't be shy! Think of it this way-- If you are a member of Protospace, not only are you encouraged to make changes, Not editing implies that your agreement with this document. We need our input.

Occupancy

Currently the Alberta government limits indoor gatherings to a maximum of 15.

Protospace will provide a mechanism near the entrance that will show the total current occupancy at a glance. An example mechanism would be tag board with 15 tags. It is required that all members must use this mechanism entering and exiting Protospace. If Protospace is at maximum occupancy, you are not allowed to enter.

Limiting Transmission

If you are sick you are not allowed to enter Protospace.
You must observe the 2 meter social distancing rules at all times.
After using a station, (such as the laser cutter) you must disinfect the station according to directions posted.
Wash your hands.

Consequences

Any member seen not following the above rules is subject to a 2 week suspension of card access.
The member with the lowest issued tag number is considered the person responsible for enforcement.

Additional Things Members Can Do To Help

Try to use the space as minimally as possible. Do your projects at home as much as you can.
Wear a mask.
Use the tracking app ABTraceTogether