Power Levels

Back to the Laser Cutter

Placeholder - Hoping to create a list of current power levels with examples of output. Let me know if there's a better location for this page or if it's relevant at all. - wintr

Cut Mode

Powder Coated Aluminium

• 

  Powder Coated Aluminium
  Speed: 20
  Power: 40
  Date: 13.03.04

Engrave Mode

Vegetable Tanned Leather

• 

  Vegetable Tanned Leather
  Note: power settings identified DO NOT reflect the current power modulation range of the laser (approximately 8%-30%) - values from the image would need to be scaled.
  Note: four variables are varied on the grid: Speed, Power, Scan Gap, and Focus. Scan gap is the distance between successive engrave lines. Focus indicates distance above the surface of the material that the focal point is set.