Protospace Wiki

Electronics SMT workshop

Revision as of 19:44, 23 July 2014 by Calgaryconehead (talk | contribs) (Electronics SMT workshop - Freeduino)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

What: Electronics SMT workshop

When: 7-9pm, July 30/31 2014

Where: Main Bay work benches

Who:

  • Coordinator: John Jardine
  • Attendees:
    • 30-July:
    • 31-July:

Tools & Equipment:

  • Refow Oven
  • Hot air rework station + soldering iron
  • tweezers
  • X-acto knife
  • magnifying class/lamp
  • power supply (USB Mini cable from laptop is sufficient)
  • laptop with Arduino software installed (for programming)

How:

  1. Apply solder paste using stencil
  2. Place SMD parts ensuring proper polarity
  3. Bake boards
  4. Place discretes by hand soldering
  5. Visual inspection
  6. Optional electrical testing
  7. Apply power (check for hot components
  8. Install Atmel 328p MCU
  9. Apply power and perform software test.
Retrieved from "https://wiki.protospace.ca/index.php?title=Electronics_SMT_workshop&oldid=1238"