Tools we want

Notes

To Donors/Lenders: Not all tools are listed, and we always appreciate upgrades to our existing equipment. If you have any of the following tools (or any others) you'd like to donate, please contact a Protospace member or director to arrange for dropoff or pickup. We love tools and give good homes for them! When in doubt, ask, even for small hand tools, there's much we need.

To Requesters: When adding requests, please fill out the date and your name so people know who to talk to if there are questions. Add new items alphabetically. If your request has been struck out, that means that it has been fulfilled as written. If you are still not satisfied with the equipment at Protospace, please add a new (more specific if necessary) request. If your request was fulfilled and then the equipment was removed from Protospace, please also add a new request.

Not all tools have equal priority; this is a Wish List.

Tools listed in italic have been suggested for after our next expansion.

General Space Stuff

• A robot arm mounted on a track on the ceiling, to clean the space when nobody's around and other stuff - Ian O - 2016
• A large room with good lighting and floor space for large projects - Mike M - 2016-11-02
• Dedicated hot metal area - Mike M - 2016-11-02

Automotive Tools

• Engine Hoist - Matt F - 2012-11-23
• Motorized Winch / Gantry - Matt F - 2012-11-23

Chemistry and Physics Tools

• Atomic force microscope - Ian O - 2016-03-06
• Centrifuge - Ian O - 2016-03-06
• Cryocooler - Ian O - 2016-03-06 (Ian is looking into building)
• Dynamic rotor balancing machine - Barrie and Ian O - 2016-03-06 (Barrie will build one in a few years)
• Mass spectrometer - Ian O - 2017-02
• Optical spectrometers/spectroscopes of various kinds (such as ramanPi) - Ian O - 2016-03-06
• Scanning electron microscope - Barrie and Ian O - 2016-03-06
• Spin coater - Ian O - 2016-03-06

Crafting Tools

• Sewing Machine (leather sewing) - Matt F - 2012-11-23 fulfilled by sewing machine (Relsew)
• Sewing Machine (digital embroidery) - Matt F - 2012-11-23
• Modern sewing machine(s) - Emily C - 2016-11-02
• A large flat table area for cutting fabric - Emily C - 2016-11-02
• A whole craft area - Emily C - 2016-11-02

Electronics Tools

• Lab expansion - Mike M and I don't remember who at the Open House - 2016-11-02

Metalworking Tools

• Anvil - Matt F - 2012-11-23 fulfilled by anvil and anvil (Chris's)
• Bandsaw (horizontal metalcutting) - Matt F - 2012-11-23 fulfilled by bandsaw (Horizontal), bandsaw, metal, horizontal (Pit Bull), and bandsaw, metal, horizontal
• Bending Brake - Matt F - 2012-11-23 fulfilled by bending Brake, brake, box and pan, 24", and John W
• CNC Mill - Matt F - 2012-11-23 fulfilled by MAXNC 10 Mill, Milling machine, CNC (Terry's), and CNC Mill (Tormach)
• EDM Sinker (electro-discharge machine) - Matt F - 2012-11-23
• EDM Wire (electro-discharge machine) - Matt F - 2012-11-23
• Milling Bits & Tooling - Matt F - 2012-11-23
• Plasma Cutter table - Matt F - 2012-11-23 fulfilled by plasma cutter, CNC (Kyle Paavola's)
• Shaper, plus skiving adapter or opportunity to build one - Ian O - 2015-12-18
• Shear (sheet metal) - Matt F - 2012-11-23 fulfilled by John W
• Spot Welder - Matt F - 2012-11-23
• Welder, TIG - Matt F - 2012-11-23
• Welding Helmet (autodarkening), gloves, jackets, other gear - Matt F - 2012-11-23
• New CNC mill (not sure on details) - Mike M - 2016-11-02

Rapid Prototyping Tools

• Sintering 3D printer - Matt F - 2012-11-23
• Tabletop laser cutter - Matt F - 2012-11-23 fulfilled by laser cutter, small

Woodworking/Plastic Tools

We can build a lot of these, given sufficient motivation. See Matthias Wandel's website.

• Belt and/or Disc Sander - Matt F - 2012-11-23 fulfilled by belt and disc sander (CWD 15-315) and belt and disc sander (Dremel)
• C-clamps, long-reach - Ian O - 2016-03-07
• Disc sander, 20" - Stan H - 2015-11-?? (instructable on building one, video on using one, alternative: lathe-based sander)
• Files - Matt F - 2012-11-23
• Panel saw, preferably vertical - Unknown - 2015
• Pantorouter or maybe some kind of hybrid with the 3D pantograph thing or copy carver? - Ian O - 2016-03-06
• Router Bits - Matt F - 2012-11-23
• Router lift built into table saw extension (preferably tilting) - Everybody - 2015 fulfilled by Jeff B
• Table saw sled & screw advance box joint jig - Ian O - 2016-03-06 (Some members started planning to build a SABJJ several months to a year ago; there has been no progress on that yet.)
• Large CNC router that works and is suitable for us - Mike M - 2016-11-02

Misc Tools

• Glassblowing general equipment - Ian O - 2015-12-18
• Glassblowing lathe - Ian O - 2015-12-18
• Vacuum Former - Matt F - 2012-11-23 fulfilled by Tom O
• Better vacuum former - Corbin U - 2017 spring - in progress
• Thermal camera - Ian O - 2017-05-05