Power Levels

From Protospace Wiki
Revision as of 17:03, 12 April 2015 by Dave (talk | contribs)
Jump to navigation Jump to search

Back to the Laser Cutter

Placeholder - Hoping to create a list of current power levels with examples of output. Let me know if there's a better location for this page or if it's relevant at all. - wintr


Cut Mode

Metal

  • Powder Coated Aluminum Speed: 20 Power: 40 Date: 13.03.04

    Powder Coated Aluminum
    Speed: 20
    Power: 40
    Date: 13.03.04

Engrave Mode

Leather

  • Vegetable Tanned Leather Note: power settings identified DO NOT reflect the current power modulation range of the laser (approximately 8%-30%) - values from the image would need to be scaled. Note: four variables are varied on the grid: Speed, Power, Scan Gap, and Focus. Scan gap is the distance between successive engrave lines. Focus indicates distance above the surface of the material that the focal point is set.

    Vegetable Tanned Leather
    Note: power settings identified DO NOT reflect the current power modulation range of the laser (approximately 8%-30%) - values from the image would need to be scaled.
    Note: four variables are varied on the grid: Speed, Power, Scan Gap, and Focus. Scan gap is the distance between successive engrave lines. Focus indicates distance above the surface of the material that the focal point is set.

Retrieved from "https://wiki.protospace.ca/index.php?title=Power_Levels&oldid=1666"