Our 3D printers: Difference between revisions

Revision as of 13:07, 9 November 2016

This page compares the 3D printers currently available for use at Protospace.

Name and photo	Usable/Reliable?	Will be here long-term?	Technology	Material	Product strength	Product detail	Product cost	Build volume
ORD Bot Hadron	Yes	Yes	FFF	PLA	Medium–high	Low	Low	200×200×??? mm
PrusaMD	Most of the time—sometimes fails in the middle of a print	Maybe	FFF	ABS	High	Low	Low	180×200×180 mm
Monoprice Maker Select	Not yet—needs to be hooked up, calibrated, etc.	No—few months?	FFF	PLA	Medium–high	Low	Low	200×200×180 mm
Error creating thumbnail: File missing mUVe 1	Almost ready to use	Yes	SLA	Resin	Medium?	Medium	Medium	145×145×185 mm

@@ Line 7: / Line 7: @@
 |-
 | [[File:3D printer, PrusaMD.jpg|200px]]<br>[[3D printer, FFF (PrusaMD)|PrusaMD]] || Most of the time—sometimes fails in the middle of a print || Maybe || FFF || ABS || High || Low || Low || 180×200×180 mm
-|-
-| [[3D printer, FFF (MakerBot Thing-O-Matic)|MakerBot Thing-O-Matic]] || No—needs new Arduino and probably other stuff || Probably || FFF || PLA/ABS? || Medium–high || Low || Low || 110×110×120 mm
 |-
 | [[3D printer, FFF (Monoprice Maker Select)|Monoprice Maker Select]] || Not yet—needs to be hooked up, calibrated, etc. || No—few months? || FFF || PLA || Medium–high || Low || Low || 200×200×180 mm
-|-
-| [[3D printer, FFF (German RepRap X400 Pro)|German RepRap X400 Pro]] || No—needs new thermistor at least || No—until July/August 2016 || FFF || PLA || Medium–high || Low || Low || 390×400×320 mm
 |-
 | [[File:3D printer, mUVe 1.jpg|200px]]<br>[[3D printer, SLA (mUVe 1)|mUVe 1]] || Almost ready to use || Yes || SLA || Resin || Medium? || Medium || Medium || 145×145×185 mm
-|-
-<!--
-| [[File:InVision si2.jpg|200px]]<br>[[3D printer, MJM (3D Systems InVision si2)|3D Systems InVision si2]] || No || No || MJM || Acrylic resin || Low || High || High || 298×185×203 mm
--->
 |}
 [[Category:Equipment overview and comparison articles]]