Power Levels: Difference between revisions
Jump to navigation
Jump to search
mNo edit summary |
No edit summary |
||
| Line 4: | Line 4: | ||
== | ==Cut Mode== | ||
===Metal=== | |||
<gallery> | |||
File:Wintr-sigil.jpeg|Powder Coated Aluminum<br>Speed: 20<br>Power: 40<br>Date: 13.03.04 | |||
</gallery> | |||
==Engrave Mode== | |||
==Leather== | |||
<gallery> | <gallery> | ||
File: | File:LeatherEngrave.jpg|Vegetable Tanned Leather<br>Note: power settings identified DO NOT reflect the current power modulation range of the laser (approximately 8%-30%) - values from the image would need to be scaled.<br>Note: four variables are varied on the grid: Speed, Power, Scan Gap, and Focus. Scan gap is the distance between successive engrave lines. Focus indicates distance above the surface of the material that the focal point is set. | ||
</gallery> | </gallery> | ||
Revision as of 17:02, 12 April 2015
Placeholder - Hoping to create a list of current power levels with examples of output. Let me know if there's a better location for this page or if it's relevant at all. - wintr
Cut Mode
Metal
Powder Coated Aluminum
Speed: 20
Power: 40
Date: 13.03.04
Engrave Mode
Leather
Vegetable Tanned Leather
Note: power settings identified DO NOT reflect the current power modulation range of the laser (approximately 8%-30%) - values from the image would need to be scaled.
Note: four variables are varied on the grid: Speed, Power, Scan Gap, and Focus. Scan gap is the distance between successive engrave lines. Focus indicates distance above the surface of the material that the focal point is set.
