Tools we have: Difference between revisions

From Protospace Wiki
Jump to navigation Jump to search
(Added orbital sander & makita drill)
(Added link to New Tools Procedure)
Line 1: Line 1:
==Notes==
==Notes==


Fill in any data you know of/own in the following suggested format (alphabetically):
We can always use new tools! Please feel free to contact Protospace to donate, arrange for pickup, or drop them off in person.
# Tool Name (Brand/Color)
# Tool Owner/Donator name if any.
# Tool Ownership Status (Protospace property, on loan, semi-permanent loan [likely staying at PS but donor might take it back some day], private)
# Tool Status (working/needs fixing/finicky/etc)
# Tool Use Restrictions (Open to all, open to members only, ask owner first, read instructions first, must be trained/certified).


Please add pictures too.
Members: Follow this [[Adding New Tools Procedure]]


Also, please amalgamate old content at bottom to new format, removing the old as you go. Delete this message when complete.
Also, please amalgamate old content at bottom to new format, removing the old as you go. Delete this message when complete.

Revision as of 13:13, 5 December 2012

Notes

We can always use new tools! Please feel free to contact Protospace to donate, arrange for pickup, or drop them off in person.

Members: Follow this Adding New Tools Procedure

Also, please amalgamate old content at bottom to new format, removing the old as you go. Delete this message when complete.

Treat tools with respect and care! Also clean them up and put them back before you leave :)

3D Printing/Cutting Tools

  • 3D Printer (Utilimaker) - Brian Queen - ?? - Working okay, needs heated bed - ??

Automotive Tools

Chemistry

  • Bench Top Fume Hood (White) - James/Travis - ?? - Design Phase - ??
  • Chemical Storage - James/Travis - ?? - Design Phase - ??
  • Hot Plate/Stirrer (Lab Line/Orange) - James - Private - Working - Ask Owner First
  • Hot Plate/Stirrer (VWR/White) - James - Semi-Permanent Loan - Working, needs new ceramic top - Ask Owner First
  • Rheostat For Heating Mantle (Green) - James - Private - Working - Ask Owner First
  • Solder Fume Extractors - James/Inks - ?? - Sourcing Materials - Open to All

Electronics Tools

  • Compressor (small/black), Air Tank, Controls & Air Dryer - circuithacker & 19200baud - Loaned While Members - Needs plumbing and wiring fix - Paired with Pick & Place
  • Lab Power Supply - ?? - ?? - ??
  • Oscilloscope (Kikusui COS5060 60Mhz) - Dan Damron - Working - Open to Members Only
  • Oscilloscope (Tektronics 2225 50Mhz) - ?? - ?? - ??
  • Reflow SMT Station - Dan Damron - ?? - Working - Open to Members Only
  • SMT Hot Air Rework Station (with soldering tools)- Dan Damron - Personal - Working - Ask Owner First

Metalworking Tools

  • Forge (charcoal) - Travis - Semi-permanent Loan - Working - Ask Owner
  • Tap & Die set (Mastercraft, blue) - Travis - Donated to Protospace - Working - Self-teach, read/learn how to not break taps before use

Woodworking/Plastic Tools

  • Cordless Drill (Orange) - ?? - ?? - Working - ??

Misc Tools

  • PA System & Speakers - Dan Damron - ?? - ?? - ??
  • Sewing Machine (Singer 730) - ?? - ?? - Marginally Working - ??
  • Sewing Machine (EuroPro) - ?? - ?? - Needs Fixing - ??
  • Sewing Machine (Kenmore) - Gina N - Donated to Protospace - Working - Open To Members
  • Vacuum Former (complete) - Lorin - ?? - ?? - ??
  • Vinyl Cutter - ?? - ?? - ?? - ??


Old Content To Be Merged With Above or Deleted

Member tools and gadgets

Tremaine:

  • 4 1 ton vehicle jack stands - member only use
  • metric ratchet set with 3/8" and 1/4" drivers (6mm to 19mm sockets) - member only use
  • metric ratchet 1/2" driver, 1 short extender and 1 long, sockets from 12mm to 24mm (some deep impact) - member only use
  • metric crescent wrenches 8mm - 24mm - member only use
  • variety of wrenches, standard screwdrivers - member only use
  • Metric hex key set - member only use
  • Heat gun - member only use
  • Torque wrench - member only use
  • Breaker bar with 1/2" driver - member only use
  • Blowtorch (triggerstart) - member only use


Mike Hermann

  • Hitachi 200 MHz digital scope
  • Weller Adjustable soldering station
  • 2 channel 30 VDC bench supply
  • Current clamps for multimeter
  • Std metal working handtools
  • Std wood working handtools
  • Makita LiON contractor pack (4 tool: rotary saw, sabre/sawsall, driver, drill)
  • Paintgun (compressor driven)
  • Rotary saw
  • Jigsaw
  • 2.5 T rollaway jack
  • Metric and Imperial wrench set
  • Large torque wrench
  • Shop vac
  • Dremel and kit
  • Bit set (std drivers, allan key, torx, torx secure, etc)

Dan VE6IBM

  • 60 Mhz 3 channel scope
Retrieved from "https://wiki.protospace.ca/index.php?title=Tools_we_have&oldid=827"