Power Levels: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
mNo edit summary |
||
| (7 intermediate revisions by 3 users not shown) | |||
| Line 1: | Line 1: | ||
[[Laser Cutter|Back to the Laser Cutter]] | |||
Placeholder - Hoping to create a list of current power levels with examples of output. Let me know if there's a better location for this page or if it's relevant at all. - wintr | |||
== | |||
==Cut Mode== | |||
===Powder Coated Aluminium=== | |||
<gallery> | |||
File:Wintr-sigil.jpeg|Powder Coated Aluminium<br>Speed: 20<br>Power: 40<br>Date: 13.03.04 | |||
</gallery> | |||
==Engrave Mode== | |||
===Vegetable Tanned Leather=== | |||
<gallery> | |||
File:LeatherEngrave.jpg|Vegetable Tanned Leather<br>Note: power settings identified DO NOT reflect the current power modulation range of the laser (approximately 8%-30%) - values from the image would need to be scaled.<br>Note: four variables are varied on the grid: Speed, Power, Scan Gap, and Focus. Scan gap is the distance between successive engrave lines. Focus indicates distance above the surface of the material that the focal point is set. | |||
</gallery> | |||
Latest revision as of 17:05, 12 April 2015
Placeholder - Hoping to create a list of current power levels with examples of output. Let me know if there's a better location for this page or if it's relevant at all. - wintr
Cut Mode
Powder Coated Aluminium
Powder Coated Aluminium
Speed: 20
Power: 40
Date: 13.03.04
Engrave Mode
Vegetable Tanned Leather
Vegetable Tanned Leather
Note: power settings identified DO NOT reflect the current power modulation range of the laser (approximately 8%-30%) - values from the image would need to be scaled.
Note: four variables are varied on the grid: Speed, Power, Scan Gap, and Focus. Scan gap is the distance between successive engrave lines. Focus indicates distance above the surface of the material that the focal point is set.
