Our 3D printers: Difference between revisions

Latest revision as of 06:05, 5 March 2023

This page compares the 3D printers currently available for use at Protospace.

Name and photo	Usable/Reliable?	Will be here long-term?	Technology	Material	Product strength	Product detail	Product cost	Build volume
ORD Bot Hadron	Yes	Yes	FFF	PLA	Medium–high	Low	Low	200×200×??? mm
PrusaMD	Most of the time—sometimes fails in the middle of a print	Maybe	FFF	ABS	High	Low	Low	180×200×180mm
AnyCubic Photon 5.5	Yes	Yes	MSLA	Resin	Medium-High	High	Low	82.62x130.56x160mm
ELEGOO Saturn	Yes	Yes	MSLA	Resin	Medium-High	High	Low	192x120x200mm

@@ Line 6: / Line 6: @@
 |[[File:2.jpg|200px]]<br>[[3D printer, FFF (ORD Bot Hadron)|ORD Bot Hadron]]||Yes||Yes||FFF||PLA||Medium–high||Low||Low||200×200×??? mm
 |-
-|[[File:3.jpg|200px]]<br>[[3D printer, FFF (PrusaMD)|PrusaMD]]||Most of the time—sometimes fails in the middle of a print||Maybe||FFF||ABS||High||Low||Low||180×200×180 mm
+|[[File:3.jpg|200px]]<br>[[3D printer, FFF (PrusaMD)|PrusaMD]]||Most of the time—sometimes fails in the middle of a print||Maybe||FFF||ABS||High||Low||Low||180×200×180mm
 |-
 |[[File:AnyCubic Photon 5.5.jpg|200px]]<br>[[3D printer, resin (Anycubic Photon 5.5) ID:159|AnyCubic Photon 5.5]]
-|I believe it is
+|Yes
-|I think so
+|Yes
-|SLA
+|MSLA
 |Resin
 |Medium-High
@@ Line 18: / Line 18: @@
 |82.62x130.56x160mm
 |-
-|Elegoo Saturn
+|[[File:170.jpg|200px]]<br>[[3D_printer,_resin_(ELEGOO_Saturn)_ID:170|ELEGOO Saturn]]
-|Believe so
+|Yes
-|Probably
+|Yes
-|SLA
+|MSLA
 |Resin
 |Medium-High
 |High
 |Low
-|
+|192x120x200mm
 |}
 [[Category:Equipment overview and comparison articles]]