Hot-air rework station (GQ Electronics 5200) ID:30: Difference between revisions
Jump to navigation
Jump to search
m (Added id) |
No edit summary |
||
| (2 intermediate revisions by one other user not shown) | |||
| Line 11: | Line 11: | ||
| certification=Demo required | | certification=Demo required | ||
| id=30 | | id=30 | ||
| itemphoto=[[File: | | itemphoto=[[File:30.jpg|350px|thumb|right|]] | ||
}} | }} | ||
| Line 18: | Line 18: | ||
==Specs== | ==Specs== | ||
* 120V AC | *120V AC | ||
* Separate hot air & soldering iron | *Separate hot air & soldering iron | ||
* Separate controls: air temp, air speed, iron temp | *Separate controls: air temp, air speed, iron temp | ||
* 270W | *270W | ||
* 200–480° C/390–900° F | *200–480° C/390–900° F | ||
* Air capacity 24L/min max | *Air capacity 24L/min max | ||
* 4 air nozzle sizes | *4 air nozzle sizes | ||
* 12 soldering iron tips | *12 soldering iron tips | ||
==Usage Notes== | ==Usage Notes== | ||
* Max temperature is usually far too hot for normal soldering, keep at reasonable temperature to extend tip life | *Max temperature is usually far too hot for normal soldering, keep at reasonable temperature to extend tip life | ||
* Do not unplug unit prior to cooldown below 60° C/140° F, fan stays on to cool air after switches turned off | *Do not unplug unit prior to cooldown below 60° C/140° F, fan stays on to cool air after switches turned off | ||
* Careful where hot air tip is pointed, is scalding hot air capable of lighting fires | *Careful where hot air tip is pointed, is scalding hot air capable of lighting fires | ||
* Keep sponge wet and regularly tin and wipe tip to keep clean | *Keep sponge wet and regularly tin and wipe tip to keep clean | ||
* Do not bend air or soldering cords excessively, will ruin unit | *Do not bend air or soldering cords excessively, will ruin unit | ||
*[https://www.youtube.com/watch?v=SKv7b3FXeHY Watch the Demo] | |||
Latest revision as of 14:44, 1 April 2022
 | |
| Type | Hot Air & Soldering Iron Rework Station |
| Make/Model | GQ 5200 SMD Rework Soldering Station |
| Serial number | ??? |
| Original owner | Donated by purchase: Wes, Wil, Travis, Mike M, Peter, Shannon, Jorgen, Daryl, & James |
| Loan status | Owned by Protospace |
| Arrival date | 05 May 2013 |
| Location | Electronics Workroom |
| Functional status | Working |
| Usage permissions | Open to Members |
| Certification | Demo required |
| Wiki-ID | 30 |
| Label | 1.0" 1.5" 2.0" |
Specs
- 120V AC
- Separate hot air & soldering iron
- Separate controls: air temp, air speed, iron temp
- 270W
- 200–480° C/390–900° F
- Air capacity 24L/min max
- 4 air nozzle sizes
- 12 soldering iron tips
Usage Notes
- Max temperature is usually far too hot for normal soldering, keep at reasonable temperature to extend tip life
- Do not unplug unit prior to cooldown below 60° C/140° F, fan stays on to cool air after switches turned off
- Careful where hot air tip is pointed, is scalding hot air capable of lighting fires
- Keep sponge wet and regularly tin and wipe tip to keep clean
- Do not bend air or soldering cords excessively, will ruin unit
- Watch the Demo