385
edits
Laser Vent Cleaning: Difference between revisions
no edit summary
No edit summary |
|||
| Line 12: | Line 12: | ||
==== Cleaning Instructions ==== | ==== Cleaning Instructions ==== | ||
# Grab a wire brush from the red cabinet in the welding area. | # Grab a Philips screwdriver, a sharpie (optional), and a wire brush from the red cabinet in the welding area. | ||
# Go up with a spotter. Take sunglasses since the white roof is very bright. | # Go up with a spotter. Take sunglasses since the white roof is very bright. | ||
# Jam the red Featherlite ladder under the roof access ladder outside:[[File:Laser-vent-cleaning-1.png|none|thumb]] | # Jam the red Featherlite ladder under the roof access ladder outside:[[File:Laser-vent-cleaning-1.png|none|thumb]] | ||
#Climb onto the roof. Navigate west to the lower roof and locate the laser vent:[[File:Laser-vent-cleaning-2.png|none|thumb]] | #Climb onto the roof. Navigate west to the lower roof and locate the laser vent:[[File:Laser-vent-cleaning-2.png|none|thumb]] | ||
# | #Place an alignment mark (optional), unscrew the vent cover and brush it clean:[[File:Laser-vent-cleaning-3.png|none|thumb]] | ||
#Screw the cover back on and go back down. | #Screw the cover back on and go back down. | ||
#Update this page or post on the forums that the laser vent was cleaned. | #Update this page or post on the forums that the laser vent was cleaned. | ||