Garment graphic printer, direct inject (Brother GT-361) ID:146: Difference between revisions

From Protospace Wiki
Jump to navigation Jump to search
(Progress!)
Line 23: Line 23:


[https://brotherdtg.com/support Brother Direct-To-Garment Technical Support Page] - Pick the <code>GT-3 PRINTERS</code> section for FAQs and Downloads
[https://brotherdtg.com/support Brother Direct-To-Garment Technical Support Page] - Pick the <code>GT-3 PRINTERS</code> section for FAQs and Downloads
<br />
== Progress ==
White cartridge is dead and non-repairable - we've tried. Story goes that it was unplugged against the warning labels, so it couldn't maintain its mandatory flush/clean cycle, and the titanium dioxide set in the lines/cartridge. Good luck getting that out. Replacement is prohibitively expensive.
White is disabled in firmware. "Lines need to be cleaned" and it'll CMY, no-K.

Revision as of 03:34, 13 May 2022

       ← Back to tools we have
146.jpg
Brother GT-3 Series Direct Inject Garment Printer
Type Brother GT-3 Series Direct Inject Garment Printer
Make/Model GT-361
Serial number ??
Original owner Robb Leece
Loan status ??
Arrival date ??
Location Sewing Room
Functional status ??
Usage permissions ??
Certification ??
Wiki-ID 146
Label 1.0" 1.5" 2.0"


Manuals

GT-3 Series Instruction Manual

GT-3 Series Product Page

GT-3 Product Brochure

Brother Direct-To-Garment Technical Support Page - Pick the GT-3 PRINTERS section for FAQs and Downloads


Progress

White cartridge is dead and non-repairable - we've tried. Story goes that it was unplugged against the warning labels, so it couldn't maintain its mandatory flush/clean cycle, and the titanium dioxide set in the lines/cartridge. Good luck getting that out. Replacement is prohibitively expensive.

White is disabled in firmware. "Lines need to be cleaned" and it'll CMY, no-K.

Retrieved from "https://wiki.protospace.ca/index.php?title=Garment_graphic_printer,_direct_inject_(Brother_GT-361)_ID:146&oldid=5984"